Lightweight Structures
2012, Journal puplications |
---|
Stig, F. and Hallström, S. "Spatial modelling of 3D-woven textiles", Composite Structures, Vol. 94, No. 5, pp 1495–1502, 2012 |
Stig, F. and Hallström, S. "A Modelling Framework for Composites containing 3D Reinforcement", Composite Structures, Vol. 94 No. 9, pp. 2895-2901, 2012 |
2011, Journal publications |
---|
Zenkert D. and Burman M., "Failure Mode Shifts during Constant Amplitude Fatigue Loading of Sandwich Beams", Int J Fatigue, Vol 33, 2011, pp 217-222 |
Barsoum Z. and Jonsson B., Influence of weld quality on the fatigue strength in seam welds, Engineering Failure Analysis, No. 18, pp. 971-979, 2011. |
M.M. Alam, Z. Barsoum, P. Jonsén, A.F.H. Kaplan, H.Å. Häggblad, Influence of defects on fatigue crack propagation in laser hybrid welded eccentric fillet joint, Engineering Fracture Mechanics, No 78, pp. 2246-2258, 2011 |
Latourte F., Grégoire D, Zenkert D, Wei X, and Espinosa H.D., ” Failure mechanisms in composite panels subjected to underwater impulsive loads”, Journal of the Mechanics and Physics of Solids, Vol 59, 2011, pp 1623-1646 |
Kaufmann M, Zenkert D, Åkermo M. "Material Selection for a Curved C-Spar Based on Cost Optimization", Journal of Aircraft, Vol 48, No 3, 2011, pp 797-804 |
Zenkert D. And Burman M., “Fatigue of Closed Cell Foams in Compression”, Journal of Sandwich Structures and Materials, Vol 13, Issue 4, 2011 pp 467 - 478 |
David Wennberg, Per Wennhage, and Sebastian Stichel, "Orthotropic Models of Corrugated Sheets in Finite Element Analysis", ISRN Mechanical Engineering, Volume 2011 (2011), Article ID 979532, 9 pages, doi:10.5402/2011/979532 |
Toll S. "The dissipation inequality in hypoplasticity", Acta Mech 221, 39–47 (2011) DOI 10.1007/s00707-011-0487-x |
C. Colombo, L. Vergani, M. Burman, Static and fatigue characterisation of new basalt fibre reinforced composites, Composite Structures, Available online 14 October 2011, ISSN 0263-8223, 10.1016/j.compstruct.2011.10.007. (http://www.sciencedirect.com/science/article/pii/S0263822311003709)doi:10.1016/j.compstruct.2011.10.007 |
Barsoum Z., Fatigue design of welded structures – some aspects of weld quality and residual stresses, Welding in the World, No. 11/12, Vol. 55, 2011. |
Kjell M.H., Jacques E., Zenkert D., Behm M. and Lindbergh G., ”PAN-based carbon fibre electrodes for structural lithium-ion batteries”, J.ElectroChem. Soc., Vol 158, No 12, 2011, A1455-A1460 |
Koisson V, Shipsha A. and Skvortsov V., "Wrinkling of Sandwich Panels - an Analytical Approach", J.Sandwich Struct. & Materials, Vol 13, No 6, 2011, pp 705-730 |
2011, Conference publications |
---|
Köll, J. and Hallström, S. "Morphology effects on constitutive properties of foams", ICCM-18, Korea, August 2011. |
Zenkert D., Kaufmann M. and Åkermo M., ”Optimisation of Composite Stuctures: Design for Cost”, International Conference on Composites for 21st Century: Current & Future Trends, Bangalore, India, 4-7 January 2011 |
M. Burman* and J. Kuttenkeuler "COMPARATIVE LIFE CYCLE ASSESSMENT (LCA) OF THE HULL OF A HIGH SPEED CRAFT" 16th International Conference on Composite Structures, ICCS 16, Porto, 2011 |
Stig, f. and Hallstrom, S. "Modelling of Composites containing 3D-woven Reinforcement", 3rd World Conference on 3D Fabrics and Their Applications, Wuhan, China, 20-21 April 2011 |
Rosén A., Edström K., Borglund D., Kuttenkeuler J., Hallström S. och Garme K. "3+2≠5 eller Programmål för ingenjörsutbildningar i ljuset av Bolognareformen", 3e utvecklingskonferensen för Sveriges ingenjörsutbildningar, Linköping, 30 nov-1 dec, 2011 |
Zenkert D. , Kazemahvazi S. and Burman M., “Fatigue of foam core sandwich beams under localized loads”, ICCM-18, Korea, August 2011 |
Kazemahvazi S. and Zenkert D., “Strength of multi-axial laminates with multiple randomly distributed holes”, ICCM-18, Korea, August 2011 |
Sisodia S, Kazemahvazi S., Zenkert D. and Edgren F., “Fatigue of composites with in-situ full-field strain measurements”, ICCM-18, Korea, August 2011 |
Jacques E., Kjell M.H., Zenkert D., Lindbergh G. and Behm M., ”Impact of the mechanical loading on the electrochemical capacity of carbon fibres for use in energy storage composite materials”, ICCM-18, Korea, August 2011 |
Kjell M.H., Jacques E., Zenkert D., Behm M. and Lindbergh G., ”Carbon Fiber Negative Electrodes for Structural Lithium-Ion Batteries", 220th ECS Meeting & Electrochemical Energy Summit in Boston, Massachusetts, October 9-14, 2011 |
C. Colombo, L. Vergani, M. Burman, "Static and fatigue characterization of new basalt fibre reinforced composites" 16th International Conference on Composite Structures, ICCS 16, Porto, 2011 |
David Wennberg, Per Wennhage, Sebastian Stichel, "Selection of Sandwich Panels for the Load Carrying Structure of High-Speed Rail Vehicles" 16th International Conference on Composite Structures, ICCS 16, Porto, 2011 |
A. A. Bhatti, P. Li, Z. Barsoum, L. E. Svensson, J. Samuelsson, Classification and crack growth modeling of cold lap defects in tandem GMAW welding, International Symposium on Fatigue Design & Material Defects, NTNU, Trondheim, Norway, 23-25 May 2011. |
J. Samuelsson, Z. Barsoum, B. Jonsson, and A. Björkblad, Fatigue Design of Light Weight Vehicle Structures – Influence of material and production procedures, International Symposium on Fatigue Design & Material Defects, NTNU, Trondheim, Norway, 23-25 May 2011. |
2011, PopSci publications |
---|
David Wennberg, Sebastian Stichel and Per Wennhage, "Cutting the Weight of High Speed Trains", Railway Gazette International, Jauary 2011 |
I. Stenius, M. Burman, J. Kuttenkeuler, M. Norrby, M. Razzola och A. Rosén "Kompositfartyg - en kort introduktion" |
2010, Journal publications |
---|
Lindström, A. and Hallström, S. "In-plane compression of sandwich panels with debonds", Composite Structures, Vol. 92, Issue 2, pp. 532-540, January 2010 |
Kolsters H. and Zenkert D., “Buckling of Laser-Welded Sandwich Panels. Part III: Ultimate Strength and Experiments”, Proc. IMechE Vol 22 Part M: Journal of Engineering for the Maritime Environment, Vol 224, pp 29-45, 2010 (DOI: 10.1243/14750902JEME174) |
Kaufmann M., Zenkert D. and Wennhage P., ”Integrated Cost/Weight Optimization of Aircraft Structures”,Structural and Multidisciplinary Optimization, Vol 41, pp 325-344, 2010, DOI 10.1007/s00158-009-0413-1 |
Kaufmann M, Zenkert D, Åkermo M. "Cost/weight optimization of composite prepreg structures for best draping strategy", Composites Part A: Applied Science and Manufacturing, Vol 41, 2010, pp 464-472, doi:10.1016/j.compositesa.2009.11.012 |
Cameron C., Wennhage P., Göransson P., and Rahmqvist S., "Structural-acoustic Design of a Multi-functional Sandwich Panel in an Automotive Context", Journal of Sandwich Structures and Materials 2010, doi:10.1177/1099636209359845 |
Christopher J. Cameron, Per Wennhage and Peter Göransson, "Prediction of NVH behaviour of trimmed body components in the frequency range 100–500 Hz", Applied Acoustics, Vol. 71, 2010. pp 708 -- 721. doi:10.1016/j.apacoust.2010.03.002 |
Battley M. and Burman M., "Characterisation of Ductile Core Materials", J.Sandwich Struct. & Mat., Vol. 12, No. 2, 2010, 237-252 |
Lindström A. and Hallström S., "Energy absorption of SMC/balsa sandwich panels with geometrical triggering features", Composite Structures, Vol. 92, No. 11, pp. 2676-2684, 2010. |
Kazemahvazi S., Kiele J. and Zenkert D., "Tensile strength of UD-composite laminates with multiple holes", Composites Science and Technology, 2010, in print |
Alam, M.M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A., “The Influence of Surface Geometry and Topography on the Fatigue Cracking Behaviour of Laser Hybrid Welded Eccentric Fillet Joints”, Journal of Applied Surface Science,256, pp.1936-1945, 2010. |
Wysocki, M., Toll S., Larsson, R., Asp L. E. "Anisotropic and tension-compression asymmetric model for composites consolidation", Composites Part A: Applied Science and Manufacturing, Vol 41, 2010, pp 284-294, doi:10.1016/j.compositesa.2009.11.016 |
K. Zimmermann, D. Zenkert, and M. Siemetzki, "Testing and Analysis of Ultra Thick Composites", Comp B, Vol 41, 2010, pp 326-336 |
Hatami M K and Barsoum Z, "Fatigue assessment of cruciform joints welded in different positions", Journal of Metallurgy & Material Science, Vol. 52, No.1, pp.87-102, 2010 |
2010, Conference publications |
---|
Burman M., Rosén A. and Zenkert D., "Spectrum Fatigue Loading of Sandwich Materials for Marine Structures", Int. Conf. Sandwich Struct. ICSS-9, Pasadena, 2010. |
Kazemahvazi S., Hallström S., Köll J. and Zenkert D., "Impact Properties of Corrugated Composite Sandwich Cores", Int. Conf. Sandwich Struct. ICSS-9, Pasadena, 2010. |
F. Stig, S, Hallström, Constitutive modelling of composite materials with full 3D orientation of reinforcement, ECCM-14, 2010 |
Barsoum Z. and Samuelsson J (editors), Proceedings of the Swedish Conference on Lightweight Optimised Welded Structures, 24-25 March 2010 Borlänge, Sweden. ISBN 978-91-7415-608-9. |
Barsoum Z., Local weld geometry and the influence on fatigue strength, pp.26-38, ibid |
Barsoum Z., Prediction of welding residual stresses by simplified approaches, pp.26-38, ibid |
Barsoum Z., Fatigue design of welded structures – effect of weld quality and residual stresses, IIW Doc. No. XIII-2312-10, International Institute of Welding, 63nd Annual Assembly, Istanbul, 2010 |
Kaplan A. F. H., Barsoum Z., Alam M. M., Jonsén P., Häggblad H.-Å., Ilar T., The Impact of Weld Shape on Fatigue Cracking of Eccentric Geometry Laser Hybrid Welds under Bending Load, The International Conference on “Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST-2010), 11-17 July 2010, Istanbul, Turkey. |
Burman M., "Composites in ships", Service vessels for offshore wind parks, 27-28 Maj, Karlskrona, 2010 |
2009, Journal Publications |
---|
Hans Kolsters and Per Wennhage, "Optimisation of laser-welded sandwich panels with multiple design constraints", Marine Structures, Vol 22, 2009, pp 154–171 |
Barsoum Z. and Barsoum I., "Residual stress effects on fatigue life of welded structures using LEFM", Engineering Failure Analysis, Vol 16, pp 449–467, 2009 |
Barsoum Z. and Gustafsson M., "Fatigue of high strength steel joints with low temperature transformation consumables", Engineering Failure Analysis, Vol 16, 2009, pp 2186-2194 |
Barsoum Z. and Lundbäck A., "Residual stress effects on fatigue life of welded structures using LEFM", Engineering Failure Analysis, Vol 16, 2009, pp 2281-2289 |
Zenkert D. and Burman M., “Tension, Compression and Shear Fatigue of a Closed Foam”, Composite Science and Technology, Vol 69, 2009, pp 785-792 |
Kazemahvazi S., Zenkert D. and Burman M., “Notch and Strain Rate Sensitivity of Non-Crimp Fabric Composites”, Composite Science and Technology, Vol 69, 2009, pp 793-800 |
Kaufmann M, Czumanski T and Zenkert D, "Manufacturing process adaptation for integrated cost/weight optimisation of aircraft structures", Plastics, Rubber and Composites: Macromolecular Engineering, Vol 38, Issue 2, pp 162-166(5), 2009. |
V. Koissin, A. Shipsha, "Residual In-plane Mechanical Properties of Transversely Crushed Structural Foams," Journal of Sandwich Structures and Materials, Vol 11(2-3), 2009, pp 199-211 |
Sohrab Kazemahvazi and Dan Zenkert, "Corrugated all-composite sandwich structures. Part 1: Analytical model", Comp Sci Tech, Vol 69, 2009, pp 913-919 |
Sohrab Kazemahvazi, Daniel Tanner and Dan Zenkert, "Corrugated all-composite sandwich structures. Part 2: Failure mechanisms and experimental programme", Comp Sci Tech, Vol 69, 2009, pp 920-925 |
B.I. Hassel, P. Berard, C.S. Modén, L.A. Berglund, "The single cube apparatus for shear testing – Full-field strain data and finite element analysis of wood in transverse shear", Composites Science and Technology, Volume 69, Issues 7-8, June 2009, Pages 877-882 |
Stig F. and Hallström S., "Assessment of the Mechanical Properties of 3D Woven Fibre Composite", Composites Science and Technology, Vol 69, 2009, pp 1686–1692 |
Vitaly Koissin, Andrey Shipsha, Vitaly Skvortsov, "Compression strength of sandwich panels with sub-interface damage in the foam core", Composites Science and Technology, Volume 69, Issue 13, October 2009, Pages 2231-2240 |
C. J. Cameron, E. Lind, P. Wennhage, and P. Göransson. 2009. Proposal of a Methodology for Multidisciplinary Design of Multifunctional Vehicle Structures including an Acoustic Sensitivity Study, Int. J. Vehicle Structures & Systems, Vol 1(13), pp 113 |
Zenkert D., "Damage Tolerance of Naval Sandwich Panels", In Major Accomplishments in Composite Materials and Sandwich Structures - An Anthology of ONR Sponsored Research, Eds. I.M. Daniel, E.E. Gdoutos and Y.P.S. Rajapakse, Springer, 2009 |
Allaoui A., Toll S., Evasque P, and Bai J., "On the compressive response of carbon nanotube tangles", Physics Letters A, Vol 373, 2009, pp 3169-3173 |
2009 Conference publications |
---|
Zenkert D. and Burman M., "Failure Mode Shifts in Fatigue of Sandwich Beams", Proc. ICCM17, Edinburgh, 2009, Paper B6:7 |
Kazemahvazi S. and Zenkert D., "Strength of GRP-laminates with multiple fragment damages", Proc. ICCM17, Edinburgh, 2009, Paper A4:11 |
Cameron C.J. , Lind E., Wennhage P. , Göransson P., "Material property steered optimization of a multifunctional body panel to structural and acoustic constraints", Proc. ICCM17, Edinburgh, 2009, Paper B6:21 |
Alam, M. M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A. F. H., FATIGUE BEHAVIOUR STUDY OF LASER HYBRID WELDED ECCENTRIC FILLET JOINTS - PART I, Proc. NOLAMP 12, August 24-26, 2009, Copenhagen (2009) |
Siemetzki M., Zimmermann K., Middendorf P., "ULTRA-THICK LAMINATES - CHANCES AND LIMITATIONS", Proc. ICCM17, Edinburgh, 2009, Paper A2:10 |
Kaufmann M, Zenkert D. Cost Optimization of Composite Aircraft Structures. In: Proceedings of the 22nd Nordic Seminar on Computational Mechanics (NSCM-22), Aalborg, Denmark, (2009). |
Jonsson B., Barsoum Z. and Ghavi Bazou A.,“Influence of weld position on fillet weld quality”, IIW Doc.No. XIII-2273-09, International Institute of Welding, 62nd Annual Assembly, Singapore, 2009. |
Jonsson B., Barsoum Z. and Ghavi Bazou A., “Influence of weld position on fillet weld quality”, IIW09ABS-0037, International conference on advances in welding and allied technologies, Singapore, 16-17 July 2009. |
Barsoum Z. and Barsoum I., “Residual stress effects on fatigue life of welded structures using LEFM”, IIW Doc. No. XIII-2266-09, International Institute of Welding, 62nd Annual Assembly, Singapore, 2009. |
Alam, M.M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A., “Fatigue Behaviour Study of Laser Hybrid Welded Eccentric Fillet Joints - Part I”, in Proceedings of NOLAMP 12 Conference, Copenhagen, Denmark, 2009. |
Alam, M. M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A.: “Fatigue behaviour study of laser hybrid welded eccentric fillet joints – Part II”: State-of-the-art of fracture mechanics and fatigue analysis of welded joints, in Proceedings of NOLAMP 12 Conference, Copenhagen, Denmark, 2009. |
Alam, M.M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A., “The Effects of Surface Topography and Lack of Fusion on The Fatigue Strength of Laser Hybrid Welds”, in Proceedings of ICALEO Conference , Orlando, Florida, USA, 2009. |
Alam, M.M., Barsoum, Z., Jonsén, P., Häggblad, H. A., Kaplan, A., “Geometrical Aspects of The Fatigue Behaviour of Laser Hybrid Fillet Welds”, in Proceedings of Fatigue design Conference , Senlis, France, 2009. |
Kaufmann M., “Integrated Cost/Weight of Composite Aircraft Structures”, SPS09, Gothenburg, 2009 |
P. Neves, S. Abad, R. Grimaldi, S. Niemeyer, O. Salomón, M. Burman, G. Ziegmann, A. J. M. Ferreira, A. A. Fernandes, "Bus Pillar Test Monitoring, Simulation and Validation", 15th Int. Conference on Composite Structures – ICCS15, Porto – June 2009 |
Popular science |
---|
Z. Barsoum & J-O. Sperle, ”Mentorprogram för forskning kan ge kommersiella fördelar för svensk industri”, Svetsen, Årg 68 nr 2, s. 20-21, 2009. |
Barsoum Z., ”Avancerade metoder för noggrannare dimensionering av svetsade konstruktioner” (swedish), Svetsen, Årg. 68, No. 3, 2009. |
2008, Journal Publications |
---|
Christopher Stamblewski, Bhavani V. Sankar and Dan Zenkert, "Analysis of Three-Dimensional Quadratic Failure Criteria for Thick Composites using the Direct Micromechanics Method", Journal of Composite Materials, Vol. 42, No.7, 2008, pp 635-654 |
Ekh J and Schön J., "Finite Element Modeling and Optimisation of Load Transfer in Multi-Fastener Joints using Structural Elements", Composite Structures, Vol 82, 2008, pp 245-256 |
Kaufmann M., Zenkert D. and Mattei C., "Cost Optimization of Composite Aircraft Structures including Variable Laminate Qualities", Composites Science and Technology, Volume 68, Issue 13, October 2008, Pages 2748-2754. |
Z. Barsoum, "Residual stress analysis and fatigue of multi-pass welded tubular structures", Engineering Failure Analysis, Volume 15, Issue 7, October 2008, Pages 863-874 |
Z. Barsoum, B. Jonsson, "Fatigue assessment and LEFM analysis of cruciform joints fabricated with different welding processes", Welding in the World, Volume 52, No. 7/8, 2008, pp 93-105 |
Burman M., Hedlund-Åström A., Lingg B., Villiger S., Enlund H. and Hellbratt S-E., "Cost and Energy Assessment of a High Speed Ship", International Journal of Small Craft Technology, RINA - Part B, Vol 150, Part B1, 2008, pp 1-10 |
V. Koissin, A. Shipsha, "Residual dent in locally loaded foam core sandwich structures - analysis and use for NDI," Composites Science and Technology, Vol 68(1), 2008, pp 57-74 |
J. Samuelsson, B. Jonsson, Z. Barsoum, Service fatigue design of complex welded construction equipment, Mat.-wiss. u. Werkstofftech, Vol 39, No. 10, 2008 |
Z. Barsoum, Restspännings-och utmattningsanalyser av svetsade stålkonstuktioner, Svetsen Årg 67, nr 3, 2008. |
C.S. Modén, L.A. Berglund, "A two-phase annual ring model of transverse anisotropy in softwoods", Composites Science and Technology, Vol 68(14), 2008, Pages 3020-3026 |
Moden CS, Berglund LA, "Elastic deformation mechanisms of softwoods in radial tension - Cell wall bending or stretching?", HOLZFORSCHUNG, Vol 62(5), 2008, Pages 562-568 |
T. Björk, G. Marquis, and J. Samuelsson, "The need for a weld quality system for fatigue loaded structures", Welding in the World, Volume 52, No. 1/2, 2008, pp |
Samuelsson J., Jonsson B. and Barsoum Z., Service fatigue design of complex welded construction equipment, Mat.-wiss. u. Werkstofftech. 2008, 39, No. 10. |
2008, Conference Publications |
---|
Kristian Zimmermann, Markus Siemetzki, Dan Zenkert, "Analysis and Manufacturing of Ultra Thick Laminates for Future Aircraft Applications", ECCM-13 |
Markus Kaufmann, Thomas Czumanski and Dan Zenkert, "Manufacturing Process Adapations for the Cost/Weight Optimization of Aircraft Structures", ECCM-13 |
S. Kazemahvazi and D. Zenkert, "The Compressive and Shear Responses of Corrugated Hierarchical and Foam Filled Sandwich Structures", ICSS-8, Porto, 2008 |
Lindström A., and Hallström S. "Energy absorption of sandwich panels with geometrical triggering features", ICSS-8, 2008 |
Åkermo M, Larberg Y.R.,”On the interply friction of different generations of unidirectional prepreg materials”, ECCM-13 |
Åkermo, M., “Thermoforming of closed cell polymer foam and its residual compressive mechanical properties”, ICSS-8, Porto, Portugal 2008 |
Samuelsson J., Jonsson B. and Barsoum Z., "SERVICE FATIGUE DESIGN OF COMPLEX WELDED CONSTRUCTION EQUIPMENT", SoSDiD 2008, Darmstadt, 2008. |
Fagerberg L. and Zenkert D., "Reasonable Knockdown Factors for Sandwich Face Wrinkling", ECCM-13 |
Christopher J Cameron, Per Wennhage, Peter Göransson and Sven Rahmqvist, “Structural -- Acoustic Design of a Multi-functional Sandwich Body Panel for Automotive Applications”, ICSS-8, Porto, Portugal 2008 |
C.S. Modén, L.A. Berglund, "A two-phase annual ring model of transverse anisotropy in softwoods", 5th Asian/Australasian Conference on Composite Materials (ACCM-5), NOV 27-30, 2006, Hong Kong, PEOPLES R CHINA |
Zimmermann and Siemetzki, "Ultra Thick Laminates for Highly Loaded Main Landing Gear Fittings", Proc. EUCOMAS, 2008 |
Siemetzki, Zimmermann et al, "MAIN LANDINGGEAR FITTING IN CFRP", Proc. SAMPE, 2008 |
Samuelsson J., Jonsson B. and Barsoum Z., Service fatigue design of complex welded construction equipment, SoSDiD, Symposium on Structural Durability in Darmstadt, Germany, June 2008. |
A. Stensson Trigell, M. Berg, S. Boij, G. Efraimsson, J. Jerrelind, P. Wennhage and P.,Göransson. ECO2 Vehicle Design an initiative for a holistic perspective on future vehicle concepts. Presented at TRA2008 in Ljubljana, Slovenia, April 21-24, 2008. |
2008. Popular Science |
---|
Barsoum Z., ”Ny doktorsavhandling: Restspännings-och utmattningsanalyser av svetsade stålkonstruktioner” (swedish), Svetsen, Årg 67 No 3, 2008. |
2007, Journal Publications |
---|
A. Shipsha, L.A. Berglund, "Shear coupling effects on stress and strain distributions in wood subjected to transverse compression," Composites Science and Technology, 67, 1362-1369, (2007). |
Juntikka, R. and Hallström, S. “Shear characterization of sandwich core materials using four-point bending”, Journal of Sandwich Structures & Materials, Vol. 9, No. 1, pp. 67-94, 2007. |
Barsoum, Z. "Residual stress prediction and relaxation in welded tubular joint", Welding in the World, Vol 1/2, 2007, pp |
V. Koissin, Skvortsov V, and A. Shipsha, "Stability of the face layer of sandwich beams with sub-interface damage in the foam core," Composite Structures, Vol 78(4), 2007, pp 507-518 |
Kazemahvazi S., Radford D., Deshpande V. and Fleck N.A., "Dynamic Failure of Clamped Circular Plates subjected to an Underwater Shock", Journal of Mechanics of Materials and Structures, Vol 2, No 10, 2007, pp 2007-2023 |
Ljungdahl, J., and Berglund, L., ”Transverse mechanical behaviour and moisture of waterlogged archaeological wood from the Vasa ship” Holzforschung, Vol. 61, pp. 279-284, 2007 |
Barsoum Z., “Residual Stress Prediction and Relaxation in Welded Tubular Joint”, IIW-1773-06, Welding in the World, Vol. 51 Issue 1/2 January/February, 2007. |
2007,Conference Publications |
---|
Zenkert D. and Burman M., “Tension, Compression and Shear Fatigue of a Closed Foam”, Proc. ICCM-16, Kyoto, July 8-13, 2007 |
Kaufmann M., Zenkert D. and Wennhage P., ”Integrated Cost/Weight Optimization of Composite Skin/Stringer Element”, Proc. ICCM-16, Kyoto, July 8-13, 2007 |
Kazemahvazi S., Zenkert D. and Burman M., “Notch and Strain Rate Sensitivity of Non-Crimp Fabric Composites”, Proc. ICCM-16, Kyoto, July 8-13, 2007 |
Hallström, S. ; Kuttenkeuler, J. and Edström, K. "The route towards a sustainable design-implement course", 3rd CDIO Conference, Camridge, MA, USA, 2007. |
Marquis G., Samuelsson J., Agerskov H. and Haagensen P. J., (editors) Integrated Design and Manufacturing of Welded Structures, proceedings International symposium, March 13-14 Eskilstuna Report 18, Lappenranta University of Technology, 2007 |
Samuelsson J., Byggnevi M., Jonsson B, Järvstråt N., Marquis G., Hansen A., Barsoum Z., Integrated Design and Manufacturing of Welded Structures, NI-project: Q-FAB, Nordic Innovation Centre, Oslo, Norway, June 2007 |
Samuelsson, J., Haagensen, P. J., Agerskov H., and Marquis, G., Work in Progress on Fatigue Strength of Welded Joints in the Nordic countries, IIW Doc. No. XIII-2168-07, International Institute of Welding, Annual Assembly, Dubrovnik, 2007 |
Y. R. Larberg and M. Åkermo, In-Plane Properties of cross-plied unidirectional prepreg, 16 International Conference on Composite Materials, ICCM-16, Kyoto, Japan, July 2007 |
M. Åkermo and Y. R. Larberg, Deformability of stacked cross-plied UD prepreg –a comparative study, 18th SiCOMP Conference on Manufacturing and design of Composites, Linköping, Sweden, May 2007 |
Stig F, and Hallström S. "Assessment of the Mechanical Properties of 3D Woven Fibre Composite", ETDCM8, 3-6 October 2007, Sardinia |
Barsoum, Z., and Jonsson, B., Fatigue strength and weld defect assessment of cruciform joints fabricated with different welding processes, IIW Doc. No. XIII-2175-07, International Institute of Welding, Annual Assembly, Dubrovnik, 2007 |
Barsoum Z., “Fatigue Strength of cruciform joints fabricated with different welding processes”, International Symposium: Integrated Design and Manufacturing of Welded Structures, Eskilstuna, Sweden, 2007. |
Barsoum Z., “Prediction of Welding Residual Stresses”, International Symposium: Integrated Design and Manufacturing of Welded Structures, Eskilstuna, Sweden, 2007. |
Barsoum Z. and Gustafson M., “Spectrum fatigue of high strength steel joints welded with low temperature transformation consumables”, 2nd International Conference on Fatigue Design, Senlis, France, 2007. |
2006, Journal Publications |
---|
Kolsters H. and Zenkert D., “Buckling of Laser-Welded Sandwich Panels. Part I: Elastic Buckling Parallel to the Webs”, Proc. IMechE Part M: Journal of Engineering for the Maritime Environment, Vol 220, No 2, pp 69-79 2006 |
Kolsters H. and Zenkert D., “Buckling of Laser-Welded Sandwich Panels. Part II: Elastic Buckling Normal to the Webs”, Proc. IMechE Vol 22 Part M: Journal of Engineering for the Maritime Environment, Vol 220, No 2, pp 81-94 2006 |
Zenkert D., Shipsha A. and Burman M., “Fatigue of Closed Cell Foams”, Journal of Sandwich Strutures and Materials, Vol 8 (6), 2006, pp 517-538 |
Ekh J., and Schön J., "Load Transfer in Multirow, Single Shear, Composite-to-Aluminium Lap Joints", Composites Science and Technology, Vol 66, no 7-8, 2006, pp 875-885 |
V. Koissin and A. Shipsha, "Deformation of Foam Cores in Uniaxial Compression-Tension Cycle," Journal of Sandwich Structures and Material, Vol 8, No 5, 2006, pp 395-406 |
Jonsson; B. and Samuelsson, J. Weld Quality Assessment and Actions, Steel Research International 77, No. 12, pp. 849-856, 2006 |
Barsoum Z. and Samuelsson J. “Fatigue Assessment of Cruciform Joints Welded with Different Methods”, Steel Research International 77, No. 12, pp.882-888, 2006 |
Ljungdahl, J., Berglund, L.A., and Burman, M., “Transverse anisotropy of compressive failure in European oak – a digital speckle photography study”, Holzforschung, Vol. 60, pp. 190–195, 2006 |
Kelly G. "Quasi-static strength and fatigue resistance of hybrid (bonded/bolted) composite single-lap joints", Composite Structures, No. 72, pp. 119-129, 2006. |
Barsoum Z., “Residual stress prediction and relaxation in welded tubular joints under constant cyclic loading”, Materials Science Forum, Vol.524-525, pp 323-328, Trans Tech Publications, 2006 |
2006, Conference publications |
---|
A. Shipsha, "Analysis of annual ring structure effects on strain fields in wood," In: Proc. of the Fourth International Conference of the European Society for Wood Mechanics (ESWM), Firenze, Italy, May 2006. |
Lindström, A. and Hallström, S. "Energy absoption of sandwich panels subjected to in-plane loads", 8th Biennial ASME Conference on Engineering Systems Design and Analysis, Torino, Italy, 2006. |
Barsoum Z., ”Residual Stress Prediction and Relaxation in Welded Tubular Joints under Constant Cyclic loading”, Materials Science Forum, Vols. 524-525, pp. 323-328, Trans Tech Publications, 2006 |
Samuelsson J. Haagensen P. Agerskov H. and Marquis G., “Work in progress on fatigue of welded structures in the Nordic countries”, IIW Document XIII-2101-06, International Institute of Welding, 59th Annual Assembly, Quebec City, Canada, 2006 |
Marquis G. Bjork T. and J Samuelsson., “Toward a weld quality system for fatigue loaded welded structures”, IIW Doc. No. XIII-2103-06, International Institute of Welding, 59th Annual Assembly, Quebec City, Canada, 2006 |
Barsoum Z. and Samuelsson J., “Residual Stress Prediction and Relaxation in Welded Tubular Joints”, IIW Doc. No. XIII-2135-06/XV-1225-06, International Institute of Welding, 59th Annual Assembly, Quebec City, Canada, 2006 |
Barsoum Z. and Samuelsson J., “Fatigue and Quality Analysis of Cruciform Joints Welded with Different Methods”, IIW Doc. No. XIII-2136-06, International Institute of Welding, 59th Annual Assembly, Quebec City, 2006 |
Barsoum Z., ”Residual Stress Prediction and Relaxation in Welded Tubular Joints under Constant Cyclic loading”, 7th European Conference on Residual Stresses, Berlin, Germany, 13-15 September 2006 |
Burman, M., Lingg, B., Villiger, S., Enlund, H., Hedlund-Åström, A., Hellbratt, S-E., “Cost and Energy Assesment of a High Speed Ship”, The second High Performance Yacht Design Conference, February13-16, 2006 |
Lindström, A. and Hallström, S. "Energy absoption of sandwich panels subjected to in-plane loads", 8th Biennial ASME Conference on Engineering Systems Design and Analysis, Torino, Italy, 2006 |