Papers in Conference Proceedings

2019

Kari, L. and Wang. B. (2019) Amplitude, frequency and magnetic dependence of magneto-sensitive elastomers by a modified bounding surface model and fractional derivatives. Invited Lecture Thirteenth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2019), Athens, Greece.

Kari, L. and Vizcaino Vergara, M. d. M.(2019) A novel modeling approach to physical ageing of reinforcing carbon-black filled elastomers. Keynote Lecture 25th International Symposium on Plasticity (Plasticity 19’) Panama City, Panama.

2018

Blas, B., Kari, L., Gil-Negerete, N. and Alonso, A. (2018) Modelling of the track supports with elements over elastic foundation together with dynamic internal degrees of freedom. ISMA 2018, Leuven, Belgium.

Gomez, E. R., Lopez Arteaga, I. and Kari, L. (2018) Multiple order excitation and response of centrifugal pendulum vibration absorbers. ISMA 2018, Leuven, Belgium.

Kari, L. (2018) Ageing of transmission components. Keynote Lecture 24th International Symposium on Plasticity (Plasticity 18’), San Juan, Puerto Rico.

Kari, L. (2018) Emerging dynamic stiffness modelling of physical and chemical ageing rubber vibration isolators in the audible frequency range. NOVEM 2018, Ibiza, Spain.

Kari. L. (2018) Models of Industry-Academia Cooperation. Invited International Forum on Engineering Education, Beijing, China.

Kari, L. and Högfeldt, A.-K. (2018) Learning advanced mathematics by acoustics – Yes we can! CDIO 2018, Kanazawa, Japan.

Wang, B. and Kari, L. (2018) Modelling the effect of the amplitude dependency to the vibration isolation effect for magneto sensitive vibration isolator system based on energy flow. ISMA 2018, Leuven, Belgium.

2017

Högfeldt, A.-K., Kann, V., Kari, L., Lundqvist, U. and Thyberg Naumann, S. (2017) Utbildningsledning: stöd- och samarbetsformer inom svenska tekniska lärosäten. 6:e Utvecklingskonferensen för Sveriges ingenjörsutbildningar, Gothenburg, Sweden.

Kari, L. (2017) Inhomogeneous chemical ageing of rubber by oxygen limited, non-local strange diffusion. Invited Lecture Eleventh International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2017), Vienna, Austria.

Kari, L. (2017) Physical ageing of rubber - the free volume solution. Keynote Lecture Workshop on the Multiphysics Behavior of Rubber (WMBR2017), Marseille, France.

Kari, L. (2017) Torsional wave propagation in tough, rubber like, doubly crosslinked hydrogel. Tenth European Conference on Constitutive Models for Rubber (ECCMR X), Münich, Germany.

2016

Afzal, M., Lopez Arteaga, I., Kari, L. and Kharyton, V. (2016) Investigation of damping potential of strip damper on a real turbine blade. TurboExpo 2016, Seoul, Korea.

Felcsuti, G., Liu, H. and Kari, L. (2016) Effect of modal behavior on dynamic transmission error of driveline gears. ISMA 2016, Leuven, Belgium.

Kari, L. (2016) Dynamic stiffness of ageing rubber vibration isolators. Innovations in Rubber Products, London, UK.

Kari, L. (2016) Dynamic stiffness of ageing rubber vibration isolators in the audible frequency range. Keynote Lecture Tenth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2016), Split, Croatia.

Kari, L. (2016) Vibration isolation – state of the art. Distinguished Plenary Lecture SVIB (Scandinavian Vibration Society) Vibration Day 2016, Stockholm.

Kari, L. and Österlöf, R. (2016) Viscoplasticity of filled elastomers by a modified boundary surface model and fractional derivatives. 22nd International Symposium on Plasticity (Plasticity 16’), Kona, Hawaii.

Lundberg, O., Lopez Arteaga, I. and Kari, L. (2016) Experimental study of the rolling contact forces between a tyre tread block and a road classification: Advanced measurement techniques. InterNoise 2016, Hamburg, Germany.

Lundberg, O., Lopez Arteaga, I. and Kari, L. (2016) The influence of roughness on the interfacial friction between a tyre tread-block and asphalt road surface – an experimental study. RubberCon 2015, Chennai, India.

2015

Kari, L. (2015) Liquid crystal elastomers in a noise reduction context — Exploring the potential. Keynote Lecture Ninth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2015), Munich, Germany.

Kari, L. (2015) Smart materials in vibration isolation. Keynote Lecture International Symposium on Engineering Science, Singapore.

Österlöf, R., Kari, L. and Wentzel, H. (2015) A finite strain viscoplastic constitutive model for filled rubber. Twenty Second International Congress on Sound and Vibration Florence, Italy.

Österlöf, R., Wentzel, H. and Kari, L. (2015) Modelling the temperature dependency of rubber with reinforcing fillers utilizing a modified boundary surface model. Ninth European Conference on Constitutive Models for Rubber (ECCMR IX), Prague, Czech Republic.

2014

Kari, L. (2014) Application oriented modeling of ordinary and magneto-sensitive elastomers. Keynote Lecture 20th International Symposium on Plasticity, Freeport, Bahamas.

Lopez Arteaga, I. (2014) Tyre/road noise and vibrations: understanding their interaction and contribution to vehicle noise and fuel consumption. Distinguished Keynote Lecture 21st International Conference of Sound and Vibration (ICSV21), Beijing, China.

Österlöf, R., Kari, L. and Wentzel, H. (2014) Modelling of carbon black filled elastomers using a modified Boundary Surface Model and fractional derivatives. RubberCon 2014: Advanced Engineering & Materials Developments, Manchester, UK.

2013

Göransson, P., Deü, J.-F. and Dazel O. (2013) Sensitivity of Vibroacoustic Response in Multi-Layered Anisotropic Poro-Elastic Panels with Non-Aligned Properties. AIA-DAGA 2013, Merano, Italy.

Hoeijmakers M., Kornilov V., Lopez Arteaga I., Nijmeijer H. and de Goey P. (2013) Experimental investigation of intrinsic flame stability. AIA-DAGA 2013, Merano, Italy.

Kari, L. (2013) Magneto-sensitive elastomers - theory and applications. Distinguished Keynote Lecture Eighth European Conference on Constitutive Models for Rubber (ECCMR VIII) San Sebastián, Spain.

Lundberg O., Lopez Arteaga I. and Finnveden S. (2013) Rolling contact and contact stiffness estimation. Internoise 2013, Innsbruck, Austria.

Michielsen J., Lopez Arteaga I. and Nijmeijer H. (2013) Plate sound radiation reduction by means of multiple tuned mass dampers. ICSV20, Bangkok, Thailand.

Moers E., Lopez Arteaga I. and Nijmeijer H. (2013) Accuracy assessment of Planar Near-field Acoustical Holography applied to non-resonant vibration imaging. ICSV20, Bangkok, Thailand.

Rumpler, R. and Göransson P. (2013) Fast frequency sweeps using Padé approximants for the finite element solution of multivariate structural-acoustic problems. ICA 2013, Montreal.

2012

Dalen v., P.L., Scholte, R., Lopez Arteaga, I., Moers, E.M.T., Nijmeijer, H. (2012) Experimental reconstruction of non-stationary sound and vibration sources by means of Transient Planar Near-field Acoustic Holography, in ISMA 2012, Editors: P. Sas, B. Bergen, Leuven, Belgium.

Dazel, O., Brouard, B., Göransson, P. (2012) An efficient solver for finite-element poroelastic problems. EURONOISE 2012, Pages 851-853. Prague.

Göransson, P. (2012) The Multifunctional and Multidisciplinary Design Paradigm - noise & vibration research within the Centre for ECO2 Vehicle Design. Keynote Lecture Korean Society of Noise and VIbration Engineers Spring meeting April 2012, Jeju Island.

Hoeijmakers, M., Lopez Arteaga, I., Manohar, M., Kornilov, V.N., Nijmeijer, H., de Goey, L.P.H. (2012) Uncertainty analysis of the prediction of thermo-acoustic instabilities by means of a network model, ICSV19, Vilnius, Poland.

Jerrelind, J., Lopez Arteaga, I., Drugge, L. and Kari, L. (2012) Effects of non-linear wheel suspension bushing on vehicle response. ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012), Chicago, USA.

Kari, L. (2012) Contemporary vibration isolation: theory and applications. Distinguished Keynote Lecture Nineteenth International Congress on Sound and Vibration, Vilnius, Lithuania.

Kari, L. and Lejon, J. (2012) Dynamic properties of magneto-sensitive materials for semi-active noise and vibration control – measurement and modelling. NOVEM 2012, Sorrento, Italy.

Krank, B., Ohlsson, U., Hedlund, A., Nordström, L., Englund, T., Göransson, P. (2012) Tuning spot weld models for vehicle body structural dynamics. ISMA 2012, Leuven, Belgium.

Liu, H., Barbagallo, M. and Finnveden, S. (2012) Wave motion and sound transmission loss of double walls filled with porous materials. ISMA 2012, Leuven, Belgium.

Liu, H. and Finnveden, S. (2012) Prediction of sound transmission loss through partitions by waveguide FEM and a Rayleigh-Ritz procedure. NOVEM 2012, Sorrento, Italy.

Lopez Arteaga, I., Mokhtari, M., Moers, E.M.T., Nijmeijer, H. (2012) Vibration detection by means of NAH in the presence of reflective surfaces, NOVEM 2012, Sorrento, Italy.

Michielsen, J., Lopez Arteaga, I., Nijmeijer, H. (2012) Acoustic excitation of a flexible panel backed by a cavity, in ISMA 2012, Editors: P. Sas, B. Bergen, Leuven, Belgium.

Moers, E.M.T., Lopez Arteaga, I., Scholte R., Nijmeijer, H. (2012) Detection of vibration modes of plates by means of Near-field Acoustic Holography in the presence of reflective surfaces, in ISMA 2012, Editors: P. Sas, B. Bergen, Leuven, Belgium.

Nadampalli, R V., Göransson, P., Glandier, C. (2012) Finite element formulation and implementation of poroelastic materials in an unbonded case, ISMA 2012, Leuven, Belgium.

Nadampalli, R. V., Göransson, P. and Glandier, C. (2012) Modelling and implementation of interface loss models for linear response simulation in a complex structure. NOVEM 2012, Sorrento, Italy.

Nadampalli, R. V., Dovstam, K., Göransson, P. and Glandier, C. (2012) On linear modelling of interface damping in a complex vibrating structure. International Symposium on the Computational Modelling of Vehicle Body Noise and Vibration, Sussex UK.

Rumpler R., Deü J.-F. and Göransson P. (2012) A Padé approximant reconstruction scheme for fast resolution of structural-acoustic finite element models including porous materials. NOVEM 2012, Sorrento, Italy.

Rumpler R., Deü J.-F. and Göransson P. (2012) An enhanced modal-based reduction of 3D porous materials modelling for efficient computation of structural-acoustic finite element applications. International Symposium on the Computational Modelling of Vehicle Body Noise and Vibration, Sussex UK.

Shoaib, M. and Kari, L. (2012) Non-Linear Elasto-Plastic Shock Wave Simulation in High-Velocity Compaction by Discrete Element Method. International Symposium on Non-Linear Acoustics (ISNA19), Tokyo, Japan.

Östberg M. (2012) Waves in elastic and poro-elastic cylinders with spatially varying anisotropy, ISMA 2012, Leuven, Belgium

2011

Barbagallo, M. and Finnveden, S. (2011) A natural variational principle for Biot's equation - Waveguide FE and SEA of multilayered structures comprising porous materials. SAPEM 2011, Ferrara, Italy.

Bodén, H. (2011) Polyharmonic distortion modelling applied to acoustic characterisation of perforates. 17th AIAA/CEAS Aeroacoustics Conference, 2011, Portland, USA.

Bodén, H. (2011) Study of nonlinear energy transfer for perforated wall treatment using acoustic source characterisation techniques. ICSV18, 10-14 July 2011, Rio de Janeiro, Brazil.

Bodén, H., Allam, S., Holmberg, A. and Åbom, M. (2011) Experimental techniques for aeroacoustics in low Mach number confined flows. Keynote presentation ICME11, Dhaka, Bangladesh.

Glav, R., Karlsson, M., Åbom, M. (2011) Aeroacoustics of duct branches with application to silencers. SAE Technical Paper 2011-24-0218, 2011.

Glav, E., Karlsson, T. (2011) Simulation of the sound attenuation properties in highly complex exhaust systems using the 2-port technique. SAE Technical Paper 2011-01-1564, 2011.

Hoeijmakers, M., Kornilov, V.N., Lopez, I., Nijmeijer, H., de Goey, L.P.H. (2011) Effect of burner partitioning on system thermo-acoustics, ICSV18, Rio de Janeiro, Brazil.

Kierkegaard, A., Efraimsson, G., Boij, S. (2011) A linearized Navier-Stokes solver for the prediction of sound propagation in duct systems, Internoise 2011, Osaka, Japan.

Kierkegaard, A., Efraimsson, G. (2011) Simulations of duct whistling with Nyquist analysis and linearized Navier-Stokes equations, AIAA-2011-2893, 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), Portland, Oregon, USA.

Knutsson, M., Lennblad, J., Bodén, H. and Abom, M. (2011). A Study on Acoustical Time-Domain Two-Ports Based on Digital Filters with Application to Automotive Air Intake Systems, SAE NVH conference, paper 2011-01-1522.

Lopez Arteaga, I., Luiten, T., Nijmeijer, H. (2011) Viscoelastic contact model for the prediction of tire/road contact forces and rolling resistance, ICSV18, Rio de Janeiro, Brazil.

Rumpler, R., Deu, J. F. and Göransson, P. (2011) A substructuring FE model for structural-acoustic problems with modal-based reduction of poroelastic interface. ECCOMAS Coupled Problems, Kos, Greece.

Dazel, O., Brouard, B. and Göransson, P. (2011) An efficient solver for finite-element poroelastic problems. SAPEM 2011. Ferrara, Italy.

Rumpler, R., Deü, J. F. and Göransson, P. (2011) Efficient solution strategies for structural-acoustic FE applications with 3D modelling of porous materials. SAPEM 2011. Ferrara, Italy.

Cuenca, J. and Göransson, P. (2011) Inverse estimation of the elastic and anelastic properties of the porous frame of anisotropic open-cell foams. SAPEM 2011. Ferrara, Italy.

Van der Kelen, C. and Göransson, P. (2011) Inverse estimation of static flow resistivity in porous materials - discussion of the method and results for two tested porous materials. SAPEM 2011. Ferrara, Italy.

Östberg, M. and Göransson, P. (2011) On cylindrical waves in anisotropic Cartesian materials and its implications on the harmonic mode separability assumption. SAPEM 2011. Ferrara, Italy.

Göransson, P. (2011) Convergence aspects in finite element solutions of multi-layered, heterogeneous porous materials. Keynote Lecture SAPEM 2011, Ferrara, Italy.

Göransson, P. (2011) The Multifunctional and Multidisciplinary Design Paradigm - ongoing research within the Centre for ECO2 Vehicle Design. FUMAT 2011, Warsaw ,Poland.

Sun, J. and Kari, L. (2011) A study of a dynamic rotating blade at an arbitrary stagger angle using Chebyshev collocation method. Internoise 2011 Osaka, Japan.

Sun, J. and Kari, L. (2011) Prediction and measurements of structural damping of compressor blades treated by hard coating. ISABE 2011 Gothenburg, Sweden.

Tiikoja, H., Rämmal, H., Åbom, M. and Bodén, H. (2011) Sound transmission in automotive turbochargers. SAE NVH conference, paper 2011-01-1525.

2010

Åbom, M. (2010). Acoustic multi-ports with application to duct acoustics. Distinguished Keynote paper ICSV17, Cairo, Egypt.

Alberdi, A., Vinolas, J., Kari, L. and Nieto, F.J. (2010) Dynamic characterisation of different magneto-sensitive natural rubbers for application in vibration isolation. ISMA 2010 Leuven, Belgium.

Allam, S. and Åbom, M. (2010). On optimal design of mufflers using micro-perforated panels. ICSV17, Cairo, Egypt.

Barbagallo, M. and Finnveden, S. (2010) Spatial energy decay and indirect couplings in statistical energy analysis. ISMA 2010, Leuven, Belgium.

Bodén, H. (2010) Single tone excitation techniques for determination of non-linear acoustic properties of perforates. ISMA 2010, Leuven, Belgium.

Bodén, H. and Eslami, A. (2010) Determination of non-linear acoustic properties of perforates using single tone excitation. ICSV17, Cairo, Egypt.

Bodén, H., Aslan, J. and Yousif, M. (2010) A study of annoyance caused by ground based activities at Bromma airport. ICSV17, Cairo, Egypt.

Boij, S., Åbom, M. and Pieters, R. (2010) Reflection properties for a flow pipe with a small angle diffuser outlet. ICSV 17, Cairo, Egypt.

Cameron, C.J. , Lind, E., Wennhage, P. , Göransson, P., (2010) Balancing Structural and Acoustic Performance of Sandwich Panels for Vehicle Applications with Topology, Property, and Size Optimization, The 7th Asian-Australasian Conference on Composite Materials, ACCM 7, Taipei, Taiwan.

Chowdhury, S.C., Razzaque, M.M., Helali, M.M. and Bodén, H. (2010) Assessment of Noise Pollution in Dhaka City. ICSV17, Cairo, Egypt.

Dovstam K and Göransson P. (2010) Is damping additive? On the accumulated effect of interface damping and material damping. ISMA 2010, Leuven, Belgium.

Finnveden, S., Fraggstedt, M., Petersson, B.A.T. (2010) Experiments on the viscoelastic properties of car tyres. DAGA 2010, Berlin, Germany.

Holmberg, A., Bodén, H. and Åbom, M. (2010). The Error Suppression of an Experimental Over-Determination of In-Duct Flow Noise Sources,16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden.

Holmberg, A. and Karlsson, M. (2010). The effect of grazing-bias flow on the self sustained oscillations in a side branch, Proceedings of the 20th International Congress of Acoustics, Sydney, Australia.

A. Kierkegaard, S. Boij, G. Efraimsson, Simulations of acoustic scattering in duct systems with flow, Proceedings of 20th International Congress on Acoustics, ICA 2010, Sydney, Australia.

A. Kierkegaard, G. Efraimsson, A Numerical Investigation of Interpolation Methods for Acoustic Analogies, AIAA-2010-3997, 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden.

Kierkegaard, A., Efraimsson, G., Boij, S. and Åbom, M. (2010) Simulations of the Whistling Potentiality of an In- Duct Orifice with Linear Aeroacoustics. 16th AIAA/CEAS Aeroacoustics Conference, AIAA-2010-4008.

Muhammad, S. and Kari, L. (2010) High-velocity compaction simulation using the discrete element method. 23rd Nordic Seminar on Computational Mechanics Stockholm, Sweden.

Östberg M and Göransson P. (2010) Prediction of noise transmission through anisotropic multilayered aircraft fuselage, using finite element models including porous, elastic and fluid domains. ISMA 2010, Leuven, Belgium.

Razzaque, M.M., Chowdhury, S.C., Helali, M.M. and Bodén, H. (2010) Impacts of Noise Pollution in Dhaka City. ICSV17, Cairo, Egypt.

Sun, J. and Kari, L. (2010) Coating methods to increase material damping of compressor blades - measurements and modeling. Turbo Expo 2010, Glasgow, Scotland.

Sun, J. and Kari, L. (2010) Numerical Modeling of Rotating Compressor Blade with arbitrary stagger angle. 23rd Nordic Seminar on Computational Mechanics Stockholm, Sweden.

Yanaz Cinar, O., Nilsson, B., Boij, B., Cinar, G. (2010) Shear Layer Effects on Acoustic Reflection in a Jet Pipe. 16th AIAA/CEAS Aeroacoustics Conference, AIAA-2010-4013.

2009

Alberdi, A., Gil-Negrete, N., Nieto, F.J., Kari, L. and Vinolas, J. (2009) An experimental study of magneto-sensitive natural rubber components applied in a vibration isolation system. Constitutive Models for Rubber VI Dresden, Germany.

Boij, S. (2009) An Analysis of the Acoustic Energy in a Flow Duct with a Vortex Sheet. 3rd Conference on Mathematical Modelling of Wave Phenomena, Växjö, Sweden, 9 – 13 June 2008. AIP Conference Proceeding 1106, 130-139.

Cameron C.J. , Lind E., Wennhage P. , Göransson P. (2009) Material property steered optimization of a multifunctional body panel to structural and acoustic constraints, Proc. ICCM17, Edinburgh, 2009, Paper B6:21

Cameron, C., Wennhage, P. and Göransson, P. (2009) Multi-Scale Structural-Acoustic Optimization of a Multi-Functional Vehicle Body Panel. Nordic Seminar on Computional mechanics NSCM-22. Aalborg October 21-23.

Alexander Ihle, Thomas Ernst, Horst Baier , Leri Datashvili, Jürgen Hoffmann, Peter Göransson, Dietmar Fasold, Pedro Portela, Miguel SantosJulian Santiago-Prowald (2009) Large porous antenna and spacecraft structures: Thermo-elastic and vibroacoustic modelling and effects and its verification via test. European Conference on Spacecraft Structures, Materials & Mechanical testing. Toulouse September 15-17.

Göransson P (2009) Tailoring structural and acoustic performance of poroelastic, open cell foams. Plenary talk CAE and Applied mechanics division Conference of Korean Society of Mechanical Engineers, Seoul May 2009.

Knutsson, M. and Åbom, M. (2009) Sound propagation in narrow tubes including effects of viscothermal and turbulent damping with the application to charge air coolers. Journal of Sound and Vibration, 320, 289-321.

Bodén, H. 2009. Multi-port techniques for acoustic characterisation of in-duct non-linear discontinuities. 15th AIAA/CEAS Aeroacoustics Conference, Miami, USA.

Bodén, H. 2009. In-duct source characterisation for multiple sources. ICSV16, 5-9 July 2009, Krakow, Poland.

Grishenkov, D., Kari, L., Brismar, T.B. and Paradossi, G. (2008) Acoustic properties of polymer-shelled ultrasound contrast agents. Bulk volume vs. microcapillary. ISMA Leuven, Belgium.

Göransson, P. (2009) Tailoring structural and acoustic performance of poroelastic, open cell foams. Plenary talk CAE and Applied mechanics division Conference of Korean Society of Mechanical Engineers, Seoul May 2009.

Holmberg, A., Boij, S. and Karlsson, M. (2009) A test rig and experimental procedure to determine the aeroacoustic properties of a splitter plate. 15th AIAA/CEAS Aeroacoustics Conference, Miami 11-13 May 2009. Paper AIAA-2009-3258.

Ihle, A., Ernst, T., Baier, H., Datashvili, L., Hoffmann, J., Göransson, P., Fasold, D., Portela, P., Santos, M., Santiago-Prowald, J. (2009) Large porous antenna and spacecraft structures: Thermo-elastic and vibroacoustic modelling and effects and its verification via test. European Conference on Spacecraft Structures, Materials & Mechanical testing. Toulouse September 15-17.

Kari, L. (2009) Magneto-Sensitive Materials for Noise and Vibration Control. Iwave 2009 Cairo, Egypt.

Kierkegaard, A., Efraimsson, G., Boij, S. (2009) Scattering matrix evaluation with CFD in low Mach number flow ducts. SAE NVH Conference, 2009-01-2040, May 2009.

Sun, J. and Kari, L. (2009) Development of a dynamic turbine blade model. Sixteenth International Congress on Sound and Vibration, Krakow, Poland.

M. Åbom, M. Karlsson and A. Kierkegaard, On the use of linear aero-acoustic methods to predict whistling, The Sixteenth International Congress on Sound and Vibration (ICSV 16), Krakow, Poland, 2009.

M. Åbom, M. Karlsson and A. Kierkegaard,On the use of linear aero-acoustic methods to predict whistling, Noise and Vibration: Emerging Methods (NOVEM), Oxford, UK, 2009.

Östberg, M. and Kari, L. (2009) Tilting and radial stiffness of elastomer bushes in the audible frequency range. 21st International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD09), Stockholm, Sweden.

2008

Allam, S. and Åbom, M. (2008) Experimental characterization of acoustic liners with extended reaction. 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada.

Bodén, H. (2008) On impedance measurements for samples with non-linear acoustic properties. 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada.

Boij, S. (2008) Acoustic Energy and Scattering in Flow Ducts. Proceedings of Radio Science and Communications & Mathematical Modelling of Wave Phenomena RVK08/MMWP08, Växjö, Sweden.

Boij, S., Nilsson, B. (2008) Scattering properties of an orifice in a flow duct – simulations with a vortex sheet model. 14th AIAA/CEAS Aeroacoustics Conference, Vancouver 5-7 May 2008. Paper AIAA-2008-3056.

Cameron, J.C., Wennhage, P., Göransson, P. and Rahmqvist, S. (2008) Structural-acoustic design of a multi-functional sandwich body panel for automotive applications. 8th International Conference on Sandwich Structures ICSS8, Porto, Portugal 2008.

Dovstam, K. and Göransson, P. (2008) Generic FE modelling of linear interface damping in vibrating structures. ISMA 2008, Leuven Belgium.

Guo, Y., Allam, S. and Åbom, M. (2008). Micro-perforated plates for vehicle applications. Proc. Inter-Noise 2008, Shanghai, China.

Göransson, P. and Hörlin, N.-E. (2008) Anisotropic porous materials, and then? Symposium on the Acoustics of PoroElastic Materials SAPEM 2008, Bradford UK.

Kari, L. and Hägerstrand, S. (2008). Wire rope isolators: An experimental inquiry into their structure borne sound properties. ISMA, Leuven, Belgium.

Kari, L. and Hägerstrand, S. (2008). Structure-borne sound properties of wire rope isolators. BNAM, Reykjavik, Iceland.

Kierkegaard, A., Efraimsson, G., Boij, S. (2008) Acoustic propagation in a flow duct with an orifice plate. ISMA, Leuven, Belgium.

Knutsson, M., Lennblad, J. and Bodén, H. (2008). Prediction of IC-engine intake orifice noise using 3D acoustic modelling and linear source data based on non-linear CFD. 5th International Styrian Noise, Vibration & Harshness Congress, Graz, Austria.

Lejon, J. and Kari, L. (2008). An experimental study of the frequency-dependent behaviour of magneto-sensitive rubber with respect to preload, vibrational amplitude and magnetic field strength. Inter Noise 2008, Shanghai, China.

Lejon, J. and Kari, L. (2008). Magneto-sensitive rubber: An experimental inquiry into its dependence on frequency, preload, vibration amplitude and magnetic field strength. Time Dependent Behaviour of Rubber, London, England.

Lind, E. and Göransson, P. (2008) Optimising Open Porous Foam for Acoustical and Vibrational Performance. Symposium on the Acoustics of PoroElastic Materials SAPEM 2008, Bradford UK.

Lundblad, J. and Kari, L. (2008). Creating creativity: Faculty engaged program development. 4th International CDIO Conference, Gent, Belgium.

Muhammad, S. and Kari, L. (2008). Elasto-plastic wave front propagation in non-linear particle systems. 18th International Symposium on Non-Linear Acoustics, KTH, Stockholm, Sweden.

Nilsson, B., Boij, S. (2008) Acoustic Reflection for a Jet Pipe Revisited. 14th AIAA/CEAS Aeroacoustics Conference, Vancouver 5-7 May 2008. Paper AIAA-2008-3019.

Stensson Trigell, A., Berg, M., Boij, S., Efraimsson, G., Jerrelind J., Wennhage, P. and Göransson, P. (2008) ECO2 Vehicle Design – an initiative for a holistic perspective on future vehicle concepts. Transport Research Arena Europe 2008, Ljubljana, Slovenia.

Bodén, H. 2008. Two-port techniques for characterisation of non-linear in-duct samples. ICSV15, 6-9 July 2008, Daejeon, South Korea.

M.Karlsson, A. Holmberg, M. Åbom, B. Fallenius and J. Fransson, Experimental determination of the aero-acoustic properties of an in-duct flexible plate, 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, May (2008).

2007

Bodén, H. (2007). Acoustic characterisation of perforates using non-linear system identification techniques. 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy.

Bodén, H. et.al. (2007). Recent advances in IC-engine source characterisation. ICSV14, Cairns, Australia.

Boij, S. and Nilsson, B. (2007). Sound in flow ducts with sharp edges. 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy.

Efraimsson, G., Pieper, T., Åbom, M., Boij, S. (2007). Simulation of wave scattering at an orifce by using a Navier-Stokes solver. 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy.

Elnady, T. and Bodén, H. (2007). New curriculum in sound and vibration control in Egypt. ICSV14, Cairns, Australia.

Feng, L. (2007). Influence of structural damping on sound radiation from a point-excited beam. Inter-Noise 2007, Istanbul, Turkey, Paper 269.

Finnveden, S. (2007). Two observations on the wave approach to SEA. Keynote paper ICSV14, Cairns, Australia.

Knutsson, M. and Bodén, H. (2007) IC-Engine Intake Acoustic Source Data from Non-Linear Simulations. SAE Technical Paper 2007-01-2209.

Moreau, A., Enghardt, L. and Bodén, H. (2007) On the Relation between Broadband Noise and Aerodynamic Fan Performance. Fan Noise 2007, Lyon, France.

Frid, A. et al. (2007). Cooling fans in railway vehicles – application of noise control measures to a roof mounted engine cooler. Fan Noise 2007, Lyon, France.

Göransson, P. (2007) Mid frequency NVH analysis - FE modelling of acoustic and vibrational damping in porous solids. Keynote lecture CDH 3rd solution seminar, Shin-Yokohama Japan.

Kari, L. (2007). Constitutive model for magneto-sensitive rubber in the audible frequency range including amplitude, frequency and magnetic field dependence. Constitutive Models for Rubber V, Paris, France.

Karlsson, M., and Glav, R. (2007). The flow reversal resonator. SAE Technical Paper 2007-01-2203.

Kelloniemi, A., Mellin, V., Finnveden, S., Gustavino, R., Göransson, P. (2007). Mechanical Study of a Plane Wave Transducer for Active Noise Control. Inter-Noise 2007, Istanbul, Turkey, Paper 369.

Knutsson, M., Bodén, H. (2007). IC-Engine Intake Acoustic Source Data from Non-Linear Simulations. SAE Technical Paper 2007-01-2209.

Knutsson, M., Åbom, M. (2007). Acoustic analysis of charge air coolers. SAE Technical Paper 2007-01-2208.

Lundblad, J., Kari, L. and Östlund, S. (2007). Integrating CDIO into a new program environment. 3rd International CDIO Conference, Boston, USA.

Moreau, A., Enghardt, L. and Bodén, H. (2007). On the Relation between Broadband Noise and Aerodynamic Fan Performance. Fan Noise 2007, Lyon, France.

Nilsson, B. and Boij, S. (2007). Acoustic waves in ducts with thin shear layers. 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy.

Peplow, A. T., Finnveden, S. (2007). Modelling structural acoustic transmission in waveguides. 19th Int. Congress on Acoustics, Madrid, Spain.

M. Karlsson, R Glav, The flow reversal resonator. SAE Technical Paper 2007-01-2203, 2007

R. Glav, J.Scarpati, O.Jönsson, A.Wikström. P.Händel and H.Hjalmarsson Prediction of engine noise using parameterized combustion pressure curves. SAE Technical Paper 2007-01-2373, 2007

A.Kierkegaard,G.Efraimsson, Generation and Propagation of Sound Waves in Low Mach Number Flows, AIAA-2007-3485, 13th AIAA/CEAS Aeroacoustics Conference, Rome, Italy, 2007.

Yan Jiang, Mats Åbom, Leping Feng, Serguei Timouchev and Christophe Maliczak, 2007. Investigation of sound generation from an axial fan for engine cooling. Fan Noise 2007, Int. Conference, Lyon.

Christophe Maliczak, Michel Roger, Mats Åbom and Anders Frid, 2007.Development of an analytical tool to predict the noise emitted by a diesel cooling fan unit. Fan Noise 2007, Int. Conference, Lyon.

Hans Rämmal and Mats Åbom, 2007. Acoustics of Turbochargers. SAE paper 2007-01-2205. SAE NVH 2007 Conference.

Sabry Allam and Mats Åbom, 2007. Aeroacoustic Investigation of Diaphragm orifices in Ducts. Inter-Noise2007, Istanbul-Turkey.

Magnus Knutsson and Mats Åbom, 2007. Sound propagation in narrow channels with arbitrary cross-sections and superimposed mean flow with application to charge air coolers. ICSV14, Cairns-Australia.

Åbom M. & Boue M. (2007). Long range sound propagation over the sea with application to wind turbine sound. Conference proc.Wind Turbine Noise, Lyon, France

2006

Allam, S., Bodén, H. and Åbom, M. (2006). Over-determination in acoustic two-port data determination. ICSV13, Vienna, Austria.

Bodén, H. (2006). Experimental investigation of non-linear acoustic properties for perforates. 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, Massachusets, USA.

Bodén, H. et.al., (2006). Investigation of non-linear acoustic properties for perforates. ICSV13, Vienna, Austria.

Dovstam, K. and Göransson, P. (2006) Mode based prediction of vibrations in highly damped structures. ISMA 2006, Leuven, Belgium.

Elnady, T., Musharraf, M., Bodén, H. and Elhadidi, B. (2006). Validation of an inverse analytical technique to educe liner impedance with flow. 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, Massachusets, USA.

Finnveden, S., Fraggstedt, M., Allmendinger, F., Halkyard, R. (2006). PZT actuation of a car tyre – a feasibility study. Acta Acustica/Acustica, May/June, Supplement 1.

Fraggstedt, M., Finnveden, S. (2006). Rolling resistance of car tyres. EuroNoise 2006, Tampere, Finland.

Guastavino, R. and Göransson, P. (2006) Modeling and Characterisation of the Vibration Dynamics Modeling of Anisotropic Porous Foam Materials. ISMA 2006 Leuven, Belgium.

Göransson, P. (2006) Advanced materials and structures for noise control. Keynote lecture Euronoise 2006, Tampere Finland.

Kari, L. (2006). Noise and vibration control by magneto-sensitive materials. Chinese Acoustical Society Meeting, Xiamen, China.

Kari, L. (2006). Testing Methods for Rubber Components in the Audible Frequency Range. Deutsche Kautschuk-Tagung, Nürnberg, Germany.

Kari, L. and Blom, P. (2006). High performing magneto-sensitive materials for noise and vibration applications. Recent Advances in Structural Dynamics, Southampton, England.

Knutsson, M. and Bodén, H. (2006). Experimental investigation of the acoustic effect of non-rigid walls in IC-engine intake systems. ICSV13, Vienna, Austria.

Lind, E. and Göransson, P. (2006) Parametric relations for porous foams and their use in optimization of structural acoustic performance of multilayer trim components. Meeting of the Acoustical Society of America, December 2006, Hawaii.

Rustighi, E., Elliot, S. J., Finnveden, S., Gulyás, K., Mócsai, T., Danti, M. (2006). Linear stochastic evaluation of tyre vibration due to tyre/road excitation. EuroNoise 2006, Tampere, Finland.

Svensson, E. and Karasalo, I. (2006). Estimation of acoustic parameters of a shallow-water communication channel. Eighth European Conference on Underwater Acoustics, 69-74.

Åbom, M., Allam, S. and Boij, S. (2006). Aero-acoustics of flow duct singularities at low Mach numbers. 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, Massachusets, USA.

R. Glav, M.Åbom and R.Fairbrother Acoustic modelling for practical intake and exhaust system design. Proceedings, 4:th International Styrian Noise, Vibration and Harshness Congress, 2006

A. Kierkegaard, G. Efraimsson, J. Hoepffner, E. Åkervik, D. Henningson, M. Åbom,

Identifications of sources of sound in low Mach number flows by the use of flow field eigenmodes, The Thirteenth International Congress on Sound and Vibration (ICSV 13), Vienna, Austria, 2006.

Fairbrother R., Åbom M., Elnady T. and Ollivier F., 2006. Linear acoustic simulation and experimental characterisation of a modular automotive muffler. ICSV 13, Vienna.

2005

Allam, S. and Åbom, M. (2005). Full plane wave decomposition using microphone arrays in ducts. NOVEM 2005, St. Raphael, France.

Allam, S. and Åbom, M. (2005). Diesel engine after treatment devices: Acoustic modelling. 12th International Congress on Sound and Vibration, Lisbon, Portugal.

Backström, D. and Nilsson, A. (2005). Flexural vibration of a three-layer sandwich beam. 7th International Conference on Sandwich Structures, Aalborg, Denmark.

Backström, D. and Nilsson, A. (2005). Modelling the flexural vibration of a sandwich beam using modified Timoshenko theory. 12th International Congress on Sound and Vibration, Lisbon, Portugal.

Blom, P. and Kari, L. (2005). Magneto-sensitive rubber in the audible frequency range. Constitutive Models for Rubber IV, KTH, Stockholm, Sweden.

Boij, S. (2005). Low frequency sound absorption at sharp edges in flow ducts. 12th International Congress on Sound and Vibration, Lisbon, Portugal.

Boij, S. (2005). Parameter dependence of flow acoustic interaction. 2nd Conference on Mathematical Modelling of Wave Phenomena, Växjö, Sweden.

Cederholm, A., Jönsson, M., Karlsson, P., Robinson, J. , Karasalo, I. (2005). Robust autopositioning for an AUV-mounted SAS - a comparative study. Underwater Acoustic Measurements: technologies & results. Heraklion, Crete.

Coja, M. and Kari, L. (2005). An analytical, closed-form stiffness model for preloaded conical rubber mounting in the audible frequency range. Constitutive Models for Rubber IV, KTH, Stockholm, Sweden.

Dovstam, K., Göransson, P. and Semeniuk, B. (2005). Mode based prediction of vibrations in complex automotive structures, a review of shortcomings. SAE Paper No 2005-01-2343.

Feng, L., Henriksson, M. and Pärssinnen, M. (2005). On model of gearbox noise and dynamic transmission errors. 12th International Congress on Sound and Vibration, Lisbon, Portugal, paper 485.

Finnveden, S., Nilsson, C.-M., Fraggstedt, M. Waveguide FEA of the vibration of rolling car tyres. Proc Novem 2005, St Raphael, France.

Garcia, M., Kari, L., Gil-Negrete, N. and Vinolas, J. (2005). An effective engineering formula for rubber bush stiffness including amplitude dependence. Constitutive Models for Rubber IV, KTH, Stockholm, Sweden.

Gil-Negrete, N., Vinolas, J. and Kari, L. (2005). Dynamic stiffness prediction of filled rubber mounts: Comparison between a fractional derivative viscoelastic-elastoplastic model and a simplified procedure. Constitutive Models for Rubber IV, KTH, Stockholm, Sweden.

Guastavino, R. and Göransson, P. (2005). Vibration Dynamics Modeling of Anisotropic Porous Foam Materials. Invited paper. Forum Acusticum, Budapest, Hungary.

Guastavino, R., Göransson, P., and Hörlin, N.-E. (2005). Characterisation of anisotropic porous foam materials. SAPEM 2005 Symposium on the Acoustics of PoroElastic Materials, Lyon, France.

Göransson, P. (2005). Simulation of multilayered porous foam structures with integrated actuators. ICAST 2005 - 16th International Conf on Adaptive Structures and Technologies, Paris, France.

Göransson, P., Hörlin, N.-E. and Semeniuk, B. (2005). Influence of surface porosity on the radiated sound from multilayer automotive trim components. SAE Paper No 2005-01-2345.

Hörlin, N.-E. (2005). Vibro-Acoustic Modelling of Layered Porous Elastic Material Configurations Using p-Version Finite Element Formulations of Biot's Equations. USNCCM8 - Eighth U.S. National Congress on Computational Mechanics, Austin, Texas, USA.

Hörlin, N.-E., Göransson, P., and Guastavino, R. (2005). Finite element modelling of multi-layered trim components; possibilities and difficulties. SAPEM 2005 Symposium on the Acoustics of PoroElastic Materials, Lyon, France.

Ivansson, S. (2005) Reflections from steel plates with doubly periodic anechoic coatings. ICTCA, Hangzhou, Zhejiang, China, 19-23/9, 2005.

Ivansson, S., Ban, S., Ståhlsten, T. (2005). Tank measurements of high-frequency pulse reflections from a plate with a double periodic rubber coating. 28th Scandinavian Symposium on Physical Acoustics, Ustaoset, Norway.

Karasalo, I., Skogqvist, P. (2005). Identification of object parameters from transient bistatic scattering data. Boundary influences in high frequency, shallow water acoustics. N. Pace and P. Blondel, ed., University of Bath, U.K, 357-365.

Karasalo, I., Skogqvist, P. (2005). Object identification by bistatic acoustic scattering. Oceans 2005 Europe, Brest, France.

Karasalo, I., Skogqvist, P. (2005). Object identification from bistatic scattering data. 28th Scandinavian Symposium on Physical Acoustics, Ustaoset, Norway.

Kari, L and Blom, P. (2005). Innovative noise and vibration control by magneto-sensitive materials. Noise and Vibration: Emerging Methods 2005, Saint-Raphaël, France.

Kari, L. and Coja, M. (2005). Axial stiffness of rubber bush mountings in the audible frequency range. Twelfth International Congress on Sound and Vibration, Lisbon, Portugal.

Knutsson, M., Bodén, H. and Lennblad, J. (2005). On extraction of IC-engine intake acoustic source data from non-linear simulations. 12th International Congress on Sound and Vibration, Lisbon, Portugal, paper 286.

Liu, B., Feng, L. and Nilsson, A. (2005). Influence of pressurization on sound insulation of curved airplane panels. 12th International Congress on Sound and Vibration, Lisbon, Portugal, paper 282.

Orrenius, U., Pang, Y.-Y., Stegeman, B., Finnveden, S. (2005). Acoustic modeling of extruded profiles for railway cars. Proc Novem 2005, St Raphael, France.

Peplow, A. T., Finnveden, S. (2005). Sound propagation over inhomogeneous ground including a sound velocity profile. Mathematical Modelling of Wave Phenomena, Växjö, Sweden, 122-129.

Semeniuk, B., Göransson, P. and Hörlin, N.-E. (2005). Sound Radiated From Multilayer Trim Components. Keynote paper Forum Acusticum, Budapest, Hungary.

Torra i Fernàndez, È. and Nilsson, A. (2005). Tyre air cavity influence on tyre-road noise. Proceedings of ICSV12, Lisbon, Portugal.

Wändell, J. (2005). Evaluation of Features for Quality Control of Spiral Bevel Gears. Proceedings of COMADEM 2005, Cranfield, UK.

H.Bodén, R Glav, A Torregrossa, F.Ollivier, K.Peat, R.Fairbrother, B.Henriksson, P. Recouvreur, O.Poullard and J.Lavrentjev Noise from turbo-charged diesel engine exhaust systems. Proceedings, 12:th International Congress on Sound and Vibration, 2005.

R. Glav, R.Fairbrother and H.Bodén Linear acoustic exhaust system simulation using source data from non-linear simulation. SAE Technical Paper 2005-01-2358, 2005.

2004

Backström, D. and Nilsson, A. (2004). Modelling of a sandwich beam with a honeycomb or foam core as an equivalent bernoulli-Euler beam. 11th International Congress on Sound and Vibration, St Petersburg, Russia.

Blom, P. and Kari, L. (2004). Magneto-rheological rubber isolators in the audible frequency range. Nordic Vibration Research 2004, KTH, Stockholm, Sweden.

Coja, M. and Kari, L. (2004). A new computational method based on waveguides for modeling of preload nonlinear effects on cylindrical vibration isolators. 17th Nordic Seminar on Computational Mechanics, KTH, Stockholm, Sweden.

Coja, M. and Kari, L. (2004). A self similarity audio-frequency stiffness model of pre-compressed vibration isolators. Nordic Vibration Research 2004, KTH, Stockholm, Sweden.

Kari, L. (2004). International Magneto sensitive material in noise and vibration engineering. Conference on Noise and Vibration Engineering 2004, Leuven, Belgium.

Orrenius, U., Pang, Y.-Y., Stegeman, B., Finnveden, S. (2004) Modelling of sound transmission through floor structures in trains based on extruded profiles. Proc EuroPam 2004, Paris, France.

Svensson, E., Karasalo, I. and Hermand, J.-P. (2004). Hybrid raytrace modelling of an underwater acoustics communication channel. Seventh European Conference on Underwater Acoustics.

Torra i Fernàndez, È. and Nilsson, A. (2004). Acoustic modes in the air cavity of tyres - Prediction and reduction on noise in automobile interiors. Internoise 2004, Prague, Czech Republic.

2003

Backström, D. and Nilsson, A. (2003). Modelling the dynamics of asymmetric sandwich beams with possibly orhotropic cores. 10th Int. Congress on Sound and Vibration, Stockholm, Sweden.

Berglund P.-O. and Åbom, M. (2003). Dipole source data for small axial type fans. Fan Noise 2003, CETIM, France.

Birgersson, F., Finnveden, S. (2003) Waveguide spectral finite elements for turbulence induced vibration of plate structures. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 4475-4482.

Bodén, H. and Åbom, M. (2003). On acoustic fan installation effects: Summary of work done at MWL. Fan Noise 2003, CETIM, France.

Boij, S. (2003). The influence of flow coupling on sound propagation in flow ducts. Proc. of the 10th Int. Congress on Sound and Vibration,, Stockholm, Sweden.

Ducret, F. and Åbom, M. (2003). Low frequency sound propagation in rectangular ducts. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 3219-3227.

Finnveden, S. (2003). Evaluation of modal density and group velocity using FEM. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 1067-1074.

Guastavino, R., Göransson, P. and Semeniuk, B. (2003). Modeling of elasticity and damping in soft porous foams, preliminary results from characterisation of anisotropic moduli. 10th Int. Congress on Sound and Vibration, Stockholm, Sweden.

Göransson, P. and Semeniuk, B. (2003). Challenges in engineering modeling and simulation of noise and vibrations: some remarks on the physical modeling of multi-layered structures. Invited general lecture. Rieter Automotive Conference, Lucerne, Switzerland.

Hörlin, N.-E. and Göransson, P. (2003). Complex fluid displacement behaviour of a layered porous material. 10th Int. Congress on Sound and Vibrations, Stockholm, Sweden.

Kari, L. (2003). A nonlinear dynamic stiffness model of a vibration isolator at finite deformations. Modern Practice in Stress and Vibration Analysis, Glasgow, England.

Kari, L. (2003). Do constrained polymer layers really reduce the radiated noise? Inter Noise 2003, Seogwipo, Jeju, Korea.

Kari, L. (2003). Dynamic properties of magneto-rheological vibration isolators. Svenska Mekanikdagar 2003, Gothenburg, Sweden.

Kari, L. (2003). Magneto-rheological rubber to reduce noise: reality or fiction? - An experimental inquiry into its effectiveness. Constitutive Models for Rubber III, London, England.

Kari, L. (2003). The holistic view on vibration isolation - Product development of machines, foundations and building structures. Distinguished Keynote Lecture SVIB Special Symposium on Machine Vibrations, Oslo, Norway.

Kari, L. and Sjöberg, M. (2003). Audible stiffness of a preloaded vibration isolator at different temperatures. 10th International Congress on Sound and Vibration, Stockholm, Sweden.

Nilsson, A. and Torra i Fernàndez, È. (2003). Acoustic modes in tyres - Influence on internal noise in cars. Proc of Internoise 2003, Jeju, Korea.

Nilsson, C.-M., Finnveden, S. (2003). Waveguide finite elements for fluid and fluid-shell coupling. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 3271-3278.

Peplow, A. T., Finnveden, S. (2003). Modelling a vibrating membrane within an acoustic waveguide. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 3687-3693.

Rämmal, H. and Åbom, M. (2003). Characterization of air terminal device using acoustic 1-port models. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 1829-1840.

Semeniuk, B. and Göransson, P. (2003). Engineering modeling and simulation of noise and vibrations: some remarks on the physical modeling of multi-layered structures. 10th Int. Congress on Sound and Vibration, Stockholm, Sweden.

Sjöberg, M. and Kari, L. (2003). Measurements of rubber isolator stiffness at non-sinusoidal excitation. 10th International Congress on Sound and Vibration, Stockholm, Sweden.

Svensson, E., Karasalo, I. and Hermand, J.-P. (2003). Time variability of an underwater acoustic channel. Proc. of the 10th Int. Congress on Sound and Vibration, Stockholm, Sweden, 2633-2641.

A.Costa, R Glav and M.Åbom Application of the folded resonator. Proceedings, 10:th International Congress on Sound and Vibration, 2003

2002

Berglund, P.-O., Feng, L. and Åbom, M. (2002). An application of the noise synthesis technology (NST) to a system with an axial fan. Forum Acusticum, Seville, Spain.

Boué, M. and Bodén, H. (2002). Effect of atmospheric turbulence on the directivity of a sound source. 6th French Congress on Acoustics, Lille, France.

Cederholm, A. and Karasalo, I. (2002). Inverse modelling of rubber coated steel plates with a genetic algorithm. Proceedings of the 6th European Conference on Underwater Acoustics, Gdansk, Poland, 339-344.

Elnady, T. and Bodén, H. (2002). Hard strips in lined ducts. 8th AIAA/CEAS Aeroacoustics Conference, Breckenridge, Colorado, USA.

Feng, L. (2002). Prediction of sound pressure levels from an air-handling unit using Noise Synthesis Technology. The 9th International Congress on Sound and Vibration, University of Central Florida, Orlando, Florida, USA.

Ivansson, S. (2002). Spherical-shell scattering computations by ordinary exponentials. Proceedings of the 6th European Conference on Underwater Acoustics, Gdansk, Poland, 119-124.

Kari, L. and Sjöberg, M. (2002). Structure-borne sound properties of vibration isolators - Temperature, frequency and preload dependence. The 39th annual Technical Meeting of the Society of Engineering Science, State Collage, Pennsylvania.

Kari, L. (2002). The audible stiffness of a primary suspension isolator - Modelling and measurements. Ninth International Congress on Sound and Vibration, University of Central Florida, Orlando, Florida, USA.

Nilsson, C.-M. and Finnveden, S. (2002). Tyre Vibration Modelling with Conical Waveguide Finite Elements. Inter-Noise 2002, Detroit, USA, Paper N179.

Peplow, A.T. and Finnveden, S. (2002). Sound transmission through inhomogeneous waveguides. BEM 24, Sintra, Portugal.

Peplow, A.T. and Finnveden, S. (2002). Spectral waveguide finite elements. Forum Acustcia, Seville, Spain.

Stojek, M., Peplow, A.T. and Karasalo, I. (2002). Boundary integral equation methods for elastic layered media. IUTAM Symposium Diffraction and Scattering in Fluid Mechanics and Elasticity, 345-352.

2001

Birgersson, F. (2001). Modelling distributed sources with the DSM and Spectral FEM. Proc SVIB, Nordic Vibration Research 2001, Stockholm, Sweden.

Birgersson, F., Ferguson, N. S. and Finnveden, S. (2001). Spectral FE predictions of the vibration response of structures excited by turbulent boundary layer flow. The 8th International Congress on Sound and Vibrations, Hong Kong, China, 1381-1388.

Bodén, H., Albertson, F. and Gilbert, J. (2001). A comparison of techniques for coupling non-linear time domain source models with linear frequency domain models for sound transmission in IC-engine exhaust and inlet systems. The 8th International Congress on Sound and Vibrations, Hong Kong, China.

Bodén, H. and Elnady, T. (2001). The effect of hard strips in lined ducts on sound propagation. 5th CEAS-ASC Workshop on Turbomachinery and Duct Acoustics, Eindhoven, The Netherlands.

Bodén, H., Åbom, M. and NygŒrd, S. (2001). SID, a computer code for prediction of sound from complex duct systems, The 8th International Congress on Sound and Vibrations, Hong Kong, China.

Boué, M., Karasalo, I. and Bodén, H. (2001). Outdoor sound propagation using an exact finite element code. 7th AIAA/CEAS Aeroacoustics Conference, Maastricht, The Netherlands. AIAA-2001-2261.

Cederholm, A. (2001). Acoustic transmission and reflection properties of Alberich anechoic coatings. 24th Scandinavian Symposium on Physical Acoustics, Ustaoset, Norway.

Elnady, T., Bodén, H. and Glav, R. (2001). Application of the point matching method to model circumferentially segmented non-locally reacting liners. 7th AIAA/CEAS Aeroacoustics Conference, Maastricht, The Netherlands. AIAA-2001-2202.

Feng, L. (2001). Influence of compartment size on radiated sound power level of a centrifugal fan. 17th International Congress on Acoustics, Rome, Italy.

Feng, L. (2001). Vibration reduction by structure modification. The 8th International Congress on Sound and Vibration, Hong Kong, China, 1957 – 1964.

Feng, L. and Carniel, X. (2001). Comparative performance of structural joints and mechanical assemblies. First European Forum, Senlis, France.

Finnveden, S., Birgersson, F. and Ferguson, N. S. (2001). Modelling with the spectral FEM for turbulence excitation of cylindrical pipes. (invited paper). Inter-Noise 2001, Hague, 2497-2502.

Gijrath, H., NygŒrd, S. and Åbom, M. (2001). Modelling of flow generated sound in ducts. The 8th International Congress on Sound and Vibrations, Hong Kong, China.

Karasalo, I. (2001). Model analysis of a bistatic scattering experiment. 17th International Congress on Acoustics, Rome, Italy.

Karasalo, I. (2001). Transient bistatic scattering from a buried tyre, CAD/CAC 2001, DREA, Halifax, Canada.

Karasalo, I. (2001). Transient scattering from an object buried in the seabed – Numerical predictions and experimental results. Third UK Conference on Boundary Integral Methods, Univeristy of Brighton, UK.

Kari, L. (2001). Dynamic stiffness of vibration isolators in the audible frequency range. 5th Maghrebine Conference for Mechanical Studies, Brack, Libya.

Kari, L. (2001). Dynamic stiffness of rubber isolators: Radius and length dependence. Inter Noise 2001, Hague, The Netherlands.

Kari, L. (2001). Modelling the audible stiffness of preloaded vibration isolators. Constitutive Models for Rubber II, Hannover, Germany.

Nilsson, A. C. (2001). Wave propagation and sound transmission in sandwich composite plates. (plenary speech). The 8th International Congress on Sound and Vibration , Hong Kong, China, 33-48.

Nilsson, A. and Feng, L. (2001). Methods and test rigs for the evaluation of damping and vibro-insulation produced by structural joints. First European Forum, Senlis, France.

Nilsson, C-M. (2001). A waveguide finite element formulation for a conical shell. Proc SVIB, Nordic Vibration Research 2001, Stockholm, Sweden.

Nilsson, E. (2001). Dynamic and acoustic properties of orthotropic sandwich structures. 17th International Congress on Acoustics, Rome, Italy.

Pecorari, C. (2001) Backscattering of bulk waves from a surface-breaking crack under a compressive stress. IUTAM Symposium on Mechanical Waves for Composite Structures Characterization, Book series Solid Mechanics and its Applications, Vol. 92, 45-54.

Sorokin, S.V. and Peplow, A. T. (2001). Integral equation methods for fluid-structure interaction. Proceeding BETEQ, Rutgers University.

Stojek, M., Peplow, A.T., Karasalo, I. (2001). Green's tensorts for the stratified elastic medium. Second European Conference on Computational Mechanics, ECCM 2001, Krakow, Poland.

T.Elnady, R. Glav and H.Bodén Application of the point matching method to model circumferentially segmented non-locally reacting liners. Proceedings 7:th AIAA/CEAS Aeroacoustic Conference, 2001-2202, 2001.

R. Glav, M Åbom SID 3.0 A new code for simulation of low frequency sound in multi-branched pipe networks. Proceedings of the First European Forum on Materials and Products for Noise and Vibration Control in Machinery and Transportation, 2001.

2000

R Glav, O Jönsson, A semi-analytical approach to design a low-frequency absorber. Proceedings, InterNoise, 2000.

Top page top