Papers in International Journals and Books

2019

Wang, B. & Kari, L. (2019) A nonlinear constitutive model by spring, fractional derivative and modified bounding surface model to represent the amplitude, frequency and the magnetic dependency for magneto-sensitive rubber. Journal of Sound and Vibration, 438, 344-353..

2018

Afzal, M., Lopez Arteaga, I. & Kari, L. (2018) Numerical analysis of multiple friction contacts in a real turbine bladed disk. International Journal of Mechanical Sciences, 137, 224-237.

Blanco, B., Alonso, A., Kari, L., Gil-Negrete, N. & Gimenez, J. G. (2018) Implementation of Timoshenko element local deflection for vertical track modelling. Vehicle System Dynamics, Accepted 4 August.

Blanco, B., Alonso, A., Kari, L., Gil-Negrete, N. & Gimenez, J. G. (2018) Distributed support modelling for vertical track dynamic analysis. Vehicle System Dynamics, 56, 529-552.

2017

Kari, L. (2017) Dynamic stiffness of chemically and physically ageing rubber vibration isolators in the audible frequency range Part 2: Waveguide solution. Continuum Mechanics and Thermodynamics, 29, 1047-1059.

Kari, L. (2017) Dynamic stiffness of chemically and physically ageing rubber vibration isolators in the audible frequency range Part 1: Constitutive equations. Continuum Mechanics and Thermodynamics, 29, 1027-1046.

Lundberg, O. E., Kari, L., & Lopez Arteaga, I. (2017). A compact internal drum test rig for measurements of rolling contact forces between a single tread block and a substrate. Measurement, 103, 370-378.

Semeniuk, B. P. & Göransson, P. (2017) Microstructure based estimation of the dynamic drag impedance of lightweight fibrous materials. Journal of the Acoustical Society of America ; 141(3), pp. 1360-1370, http://dx.doi.org/10.1121/1.4976814.

Temiz, M. A., Tournadre, J., Lopez Arteaga, I. & Hirschberg, A. (2017). Modelling vibro-acoustic coupling in flexible micro-perforated plates by a patch-impedance approach. Applied Acoustics, 125, 80-90.

Zea, E., Manzari, L., Squicciarini, G., Feng, L., Thompson, D., & Lopez Arteaga, I. (2017). Wavenumber–domain separation of rail contribution to pass-by noise. Journal of Sound and Vibration, 409, 24-42.

Österlind, T., Kari, L. & Nicolescu, C. M. (2017) Analysis of stationary displacement patterns in rotating machinery subject to local harmonic excitation. Journal of Sound and Vibration, 389, 224-235.

2016

Afzal, M., Lopez Arteaga, I., Kari, L. (2016). An analytical calculation of the Jacobian matrix for 3D friction contact model applied to turbine blade shroud contact. Computers & Structures, 177, 204-217.

Du L., Karlsson M., Åbom M. (2016) Numerical Study on the Sound Amplification of a T-Junction with Bias Flow. Proceedings of the 5th International Conference on Jets, Wakes and Separated Flows (ICJWSF2015), Springer Proceedings in Physics 185, DOI 10.1007/978-3-319-30602-5_47.

Du L., Holmberg A., Karlsson M., Åbom M. (2016) Sound amplification at a rectangular T-junction with merging mean flows. Journal of Sound and Vibration. dx.doi.org/10.1016/j.jsv.2015.12.042

Ericsson A, Rumpler R, Sjöberg D, Göransson P, Wellander N, Johansson J. (2016) A Combined electromagnetic and acoustic analysis of a triaxial carbon fiber weave for reflector antenna applications. Aerospace Science and Technology. 58:401-417. DOI: 10.1016/j.ast.2016.08.033

Gao K., van Dommelen J A W, Göransson P and Geers M G D. (2016) Computational homogenization of sound propagation in a deformable porous material including microscopic viscous-thermal effects. Journal of Sound and Vibration, 365:119–133.

Hoeijmakers, M., Kornilov, V., Lopez Arteaga, I., de Goey, P., & Nijmeijer, H. (2016). Flame dominated thermoacoustic instabilities in a system with high acoustic losses. Combustion and Flame, 169, 209-215.

Kabral R., Du L., Åbom M., (2016) Optimum Sound Attenuation in Flow Ducts Based on the “Exact” Cremer Impedance. ACTA ACUSTICA UNITED WITH ACUSTICA Vol. 102 (2016) 851 – 860. DOI 10.3813/AAA.918999 2016

Lalit M., Glav R., Karlsson M., Åbom M., (2016) A Note on the Applicability of Thermo-Acoustic Engines for Automotive Waste Heat Recovery. SAE paper 2016-01-0223. doi:10.4271/2016-01-0223

Lundberg O., Nordborg A., Lopez Arteaga I. (2016), The influence of surface roughness on the contact stiffness and the contact filter effect in nonlinear wheel-track interaction, Journal of Sound and Vibration, 366, 429-448.

Michielsen J., Lopez Arteaga I., Nijmeijer H. (2016), LQR-based optimization of multiple tuned resonators for plate sound radiation reduction, Journal of Sound and Vibration, 363, 166-180.O'Reilly C J, Göransson P et al., "Life-cycle energy optimisation : A proposed methodology for integrating environmental considerations early in the vehicle engineering design process," Journal of Cleaner Production, vol. 135, pp. 750-759, 2016.

Parra Martinez J P, Dazel O, Göransson P and Cuenca J. (2016) Derivation of the state matrix for dynamic analysis of linear homogeneous media. Journal of the Acoustical Society of America Express Letters, 140(2), pp. EL218. 

Parra Martinez J P, Dazel O, Göransson P and Cuenca J. (2016) Acoustic analysis of anisotropic poroelastic multilayered systems. J. Appl. Phys. 119, 084907; http://dx.doi.org/10.1063/1.4942443

Sack S., Åbom M., Efraimsson G., (2016) On Acoustic Multi-Port Characterisation Including Higher Order Modes. ACTA ACUSTICA UNITED WITH ACUSTICA Vol. 102 (2016) 834 – 850. DOI 10.3813/AAA.918998

Temiz M.A., Tournadre J., .Lopez Arteaga I., Hirschberg A. (2016), Non-linear Acoustic Transfer Impedance of Micro Perforated Plates with Circular Orifices, Journal of Sound and Vibration, 366, 418-428.

Zea, E., & Lopez Arteaga, I. (2016). Single layer planar near-field acoustic holography for compact sources and a parallel reflector. Journal of Sound and Vibration, 380, 129-145.

Zhou H., Lopez Arteaga I., Nijmeijer H. (2016), Broadband planar nearfield acoustic holography based on one-third-octave band analysis. Applied Acoustics, 109, 18-26.

Österlöf, R., Wentzel, H, Kari, L. (2016) A finite strain viscoplastic constitutive model for rubber with reinforcing fillers. International Journal of Plasticity, 87, 1-14.

2015

Feng L., Åbom M., Orrenius U., (2015) Engineering methods to predict noise levels at reference points with known source properties. Applied Acoustics 96 (2015) 68–74. dx.doi.org/10.1016/j.apacoust.2015.03.014

Hynninen A., Åbom M., (2015) Determination of in-duct sound power beyond the plane wave range
using wall-mounted microphones. Applied Acoustics 99 (2015) 24–30. dx.doi.org/10.1016/j.apacoust.2015.05.003

Alenius E., Åbom M., Fuchs L., (2015) Large eddy simulations of acoustic-flow interaction
at an orifice plate. Journal of Sound and Vibration, dx.doi.org/10.1016/j.jsv.2015.02.012

Kårekull O., Efraimsson G., Åbom M., (2015) Revisiting the Nelson–Morfey scaling law for flow noise from duct constrictions. Journal of Sound and Vibration 357, 233-244. dx.doi.org/10.1016/j.jsv.2015.06.019

Temiz M.A., Lopez Arteaga I., Efraimsson G., Abom M., Hirschberg A. (2015), The Influence of Edge Geometry on End-Correction Coefficients in Micro Perforated Plates, Journal of the Acoustical Society of America, 138(6), 3668-3677.

Gao K., van Dommelen J A W, Göransson P and Geers M G D. (2015) Homogenization of fluid-solid coupling in acoustic shielding materials based on poroelastic theory. Journal of Sound and Vibration, 351:251–267, doi:10.1016/j.jsv.2015.04.030.

Hoeijmakers M., Kornilov V., Lopez Arteaga I., Nijmeijer H., Goey P. de (2015), Flames in context of thermo-acoustic stability bounds, Proceedings of the Combustion Institute, 35(1),1073-1078.

Holmberg A., Karlsson M., Åbom M., (2015) Aeroacoustics of rectangular T-junctions subject to combined grazing and bias flows - An experimental investigation. Journal of Sound and Vibration 340, 152-166. dx.doi.org/10.1016/j.jsv.2014.11.040

Lee J S, Göransson P and Kim Y Y. (2015) Topology optimization for three-phase materials distribution in a dissipative expansion chamber by unified multiphase modeling approach. Comput. Methods Appl. Mech. Engrg. 287:191–211.

Lundberg O., Finnveden S., Björklund S., Pärssinen M., Lopez Arteaga I. (2015), A nonlinear state-dependent model for vibrations excited by roughness in rolling contacts, Journal of Sound and Vibration, 345, 197-213.

Van der Kelen C, Cuenca J, Göransson P. (2015) A method for the inverse estimation of the static elastic compressional moduli of anisotropic poroelastic foams - with application to a melamine foam. Polymer Testing, 43:123-130.

Van der Kelen C, Cuenca J, Göransson P. (2015) A method for characterisation of the static elastic properties of the porous frame of orthotropic open-cell foams International Journal of Engineering Science 86:44-59. DOI:10.1016/j.ijengsci.2014.10.005.

Österlöf, R., Wentzel, H., Kari, L. (2015) An efficient method for obtaining the hyperelastic properties of filled elastomers in finite strain applications. Polymer Testing, 41, 44-54.

2014

Allam S. and Åbom M. (2014) Fan noise control using micro-perforated spitter silencers. ASME - Journal of Vibration and Acoustics 136(3), doi:10.1115/1.4027245.

Boere, S., Lopez Arteaga, I., Kuijpers, A., Nijmeijer, H. (2014). Tyre/road interaction model for the prediction of road texture influence on rolling resistance. International Journal of Vehicle Design, 65(2-3), 202-221. 

Bolin, K., Almgren, M., Ohlsson, E., Karasalo I. Long term estimations of low frequency noise levels over water from an off-shore wind farm. Journal of Acoustical Society of America, 135 (1106-1114) http://dx.doi.org/10.1121/1.4863302

Bolin K., Bluhm G., Nilsson, M. E., Listening test comparing A-weighed and C-weighed sound pressure level as indicator of wind turbine noise annoyance. Acta Acustica united with Acustica, 100 (842-847) DOI 10.3813/AAA.918764

Cameron C J, Lind Nordgren E, Wennhage P and Göransson P. On the Balancing of Structural and Acoustic Performance of a Sandwich Panel based on Topology, Property, and Size Optimization. Journal of Sound and Vibration 333 (2014) 26772698. DOI:10.1016/j.jsv.2014.01.025

Cuenca J, Van der Kelen C and Göransson P. (2014) A general methodology for inverse estimation of the elastic and anelastic properties of anisotropic open-cell porous materials—with application to a melamine foam. Journal of Applied Physics 115, 084904. DOI: 10.1063/1.4865789

Dickson, C., Bolin, K. Continuous judgment by category-ratio scaling of aircraft noise, Applied Acoustics, 84, (3-8), http://dx.doi.org/10.1016/j.apacoust.2014.02.013 

Elnady T, Abom M and Yang, Y (2014) Systematic optimization of an exhaust system to meet noise radiation criteria at idle. SAE Int J Passeng. Cars-Mech Systems 7(3). doi:10.4271/2014-01-0006.

Hoeijmakers M., Kornilov V., Lopez Arteaga I., Nijmeijer H., Goey P. de (2014), Intrinsic instability of flame-acoustic coupling, Combustion and Flame 161(11), 2860-2867.

Hynninen, A. and Åbom, M. (2014) Acoustic source characterization for prediction of medium speed diesel engine exhaust noise. ASME Journal of Vibration and Acoustics 136(2). doi: 10.1115/1.402613.

Kabral R, Du L, Åbom M and Knutsson M. (2014) A compact silencer for the control of compressor noise. SAE Int. J Engines 7(3):2014. DOI:10.4271/2014-01-2060.

Kårekull O, Efraimsson G and Åbom M (2014) Prediction model of flow duct constriction noise. Applied Acoustics 82, 45-52. doi: 10.1016/j.apacoust.2014.03.001.

Lindberg E, Östberg M, Hörlin N-E and Göransson P. (2014) A vibro-acoustic reduced order model using undeformed coupling interface substructuring - application to rubber bushing isolation in vehicle suspension systems. Applied Acoustics 78, pp. 43-50.

Liu H., Barbagallo M., Finnveden S., Lopez Arteaga I. (2014). Wave propagation in sandwich panels with a poroelastic core, Journal of the Acoustical Society of America, 135(5), 2683.

Rumpler R, Göransson P and Rice HJ. (2014) An adaptive strategy for the bivariate solution of finite element problems using multivariate nested Padé approximants. International Journal of Numerical Methods in Engineering, 100:689–710. DOI: 10.1002/nme.4777.

Rumpler R, Göransson P and Deü J-F. (2014) A finite element approach combining a reduced-order system, Padé approximants, and an adaptive frequency windowing for fast multi-frequency solution of poro-acoustic problems. International Journal of Numerical Methods in Engineering, 97:759–784. DOI: 10.1002/nme.4609.

Seifzadeh A, Pietrzyk A, Göransson P and Ramakrishnan R. (2014) Experimental investigation of coupling effects of passenger compartment and trunk of a car on coupled system natural frequencies using noise transfer function. Applied Acoustics 83 , pp. 16-21.

Seifzadeh A, Pietrzyk A, Göransson P and Ramakrishnan R. (2014) Effect of coupling between passenger compartment and trunk of a car on coupled system natural frequencies using acoustic frequency response function. Applied Acoustics 76 , pp. 310-318.

Tiikoja, H., Lavrentjev, J., Rämmal, H. and Åbom, M. (2014) Experimental investigations of sound reflection from a hot and subsonic flow duct termination. Journal of Sound and Vibration 331, 1084–1096. doi:10.1016/j.jsv.2013.09.030.

Van der Kelen C, Göransson P, Pluymers B and Desmet W. (2014) On the influence of frequency-dependent elastic properties in vibro-acoustic modelling of porous materials under structural excitation. Journal of Sound and Vibration 333 (24) 6560-6571.

Östberg, M., Jerrelind, J. and Kari, L. (2014) A study of the influence of rubber bushings on the audible frequency behaviour of a truck damper. International Journal of Heavy Vehicle Systems, 21, 281-294.

Österlöf, R., Wentzel, H., Kari, L., Diercks, N. and Wollscheid, D. (2014) Constitutive modelling of the amplitude and frequency dependency of filled elastomers utilizing a modified Boundary Surface Model. International Journal of Solids and Structures, 51, 3431-3438.

2013

Alberdi-Muniain, A., Gil-Negrete, N. and Kari, L. (2013) Indirect energy flow measurement in magneto-sensitive vibration isolator systems. Applied Acoustics, 74(4), 575-584.

Alberdi-Muniain, A., Gil-Negrete, N. and Kari, L. (2013) Modelling energy flow through magneto-sensitive vibration isolators. International Journal of Engineering Science, 65, 22-39.

Barbagallo, M. and Finnveden, S. (2013) A self-adjoint variational principle for anisotropic viscoelastic Biot's equations. International Journal of Engineering Science, 63, 71-83.

Bodén, H. (2013) Two-sided multi-port techniques for characterisation of in-duct samples with non-linear acoustic properties. Acta Acustica united with Acustica, 99(3), 359-378.

Bolin, K. and Åbom, M. (2013) Wind turbine noise emissions. In: Renewable Energy Systems, 1843-1860, Ed. by Martin Kaltschmitt, Nickolas J. Themelis, Lucien Y. Bronicki, Lennart Söder, Luis A. Vega, Spriger Verlag.

Dazel, O., Brouard, B., Groby, J.-P. and Göransson, P. (2013) A normal modes technique to reduce the order of poroelastic models - Application to 2D and coupled 3D models. International Journal of Numerical Methods in Engineering 96 (2), pp. 110-128..

Hoeijmakers, M., Lopez Arteaga, I., Kornilov, V., Nijmeijer, H., Goey, P. de (2013). Accuracy assessment of thermoacoustic instability models using binary classication. International Journal of Spray and Combustion Dynamics, 5(3), 201-224.

Lejon, J. and Kari, L. (2013) Measurements on the temperature, dynamic strain amplitude and magnetic field strength dependence of the dynamic shear modulus of magneto-sensitive elastomers in a wide frequency range. ASME Journal of Vibration and Acoustics, 135, 064506.

Lind-Nordgren, E., Göransson, P., Deü, J.-F. and Dazel, O. (2013) Vibroacoustic response sensitivity due to relative alignment of two anisotropic poro-elastic layers. Journal of the Acoustical Society of America Express Letters, 133(5), pp. EL426-EL430.

Lindberg, E., Hörlin, N.-E. and Göransson, P. (2013) Component mode synthesis using undeformed interface coupling modes to connect soft and stiff substructures, Shock and Vibration 20 (1) , pp. 157-170, doi:10.3233/SAV-2012-0734 (Online ISSN 1875-9203)

Lindberg, E., Hörlin, N.-E. and Göransson, P. (2013) An Experimental Study of Interior Vehicle Roughness Noise from Disc Brake Systems, Journal of Applied Acoustics. 74(3), pp. 396-406, doi:/10.1016/j.apacoust.2012.07.011 (Available online, Oct 24, 2012)

Rumpler, R., Göransson, P. and Deü, J.-F. (2013) A residue-based mode selection and sorting procedure for efficient poroelastic modeling in acoustic finite element applications. Journal of the Acoustical Society of America 134(6), 4730-4741.

Sun, J., Kari, L. and Lopez Arteaga, I. (2013) A dynamic rotating blade model at an arbitrary stagger angle based on classical plate theory and the Hamilton's principle. Journal of Sound and Vibration, 332(5), 1355-1371.

Sun, J., Lopez Arteaga, I. and Kari, L. (2013) Dynamic modeling of a multilayer rotating blade via quadratic layerwise theory. Composite Structures, 99, 276-287.

Sun, J., Lopez Arteaga, I. and Kari, L. (2013) General shell model for a rotating pretwisted blade. Journal of Sound and Vibration, 332, 5804-5820.

Van der Kelen. C. and Göransson. P. (2013) Identification of the full anisotropic flow resistivity tensor for multiple glass wool and Melamine foam samples. Journal of the Acoustical Society of America 134(6), 4659-4669.

Weng, C., Boij, S. and Hanifi, A. (2013) The attenuation of sound by turbulence in internal flows. Journal of the Acoustical Society of America, 133(6), 3764-3776.

Östberg, M., Coja, M. and Kari, L. (2013) Dynamic stiffness of hollowed cylindrical rubber vibration isolators - The wave-guide solution. International Journal of Solids and Structures, 50, 1791-1811.

2012

Alberdi-Muniain, A., Gil-Negrete, N. and Kari, L. (2012) Direct energy flow measurement in magneto-sensitive vibration isolator systems. Journal of Sound and Vibration, 331(9), 1994-2006.

Alberdi-Muniain, A., Gil-Negrete, N. and Kari, L. (2012) Influence of carbon black and plasticisers on the dynamic properties of isotropic magneto-sensitive natural rubber. Plastics, Rubber and Composites: Macromolecular Engineering, 41(7), 310-317.

Allam, S. and Åbom, M. (2012) Noise control for cooling fans on heavy vehicles. Noise Control Eng. Journal 60(6), Nov-Dec, pp. 707-715.

Andersson, P.B.U. and Lindberg, E. (2012) Boundary element method for intensity potential approach: Predicting the radiated sound power from partially enclosed noise sources. Acta Acustica united with Acustica, 98 (4), 588-599.

Barbagallo, M. and Finnveden, S. (2012) A self adjoint variational principle for anisotropic viscoelastic Biot’s equation. International Journal for Engineering Science. Accepted for publication, doi:10.1016/j.ijengsci.2012.06.019 (Available online, Oct 17, 2012)

Blom, P. and Kari, L. (2012) The frequency, amplitude and magnetic field dependent torsional stiffness of a magneto-sensitive rubber bushing. International Journal of Mechanical Sciences, 60(1), 54–58.

Bodén, H. (2012) One-sided multi-port techniques for characterisation of in- duct samples with non-linear acoustic properties. Journal of Sound and Vibration, 331(13), 3050-3067.

Bolin, K., Kedhammar, A., Nilsson, M. E. (2012) The influence of background sounds on loudness and annoyance of wind turbine noise, Acta Acustica united with Acustica, 98, 741-748.

Cuenca, J. and Göransson, P. (2012) Inverse estimation of the elastic and anelastic properties of the porous frame of anisotropic open-cell foams. Journal of the Acoustical Society of America 132 (2) , pp. 621-629.

Deckers, E., Hörlin, N.-E., Vandepitte, D. and Desmet, W. A. (2012) Wave Based Method for the efficient solution of the 2D poroelastic Biot equations. Computer Methods in Applied Mechanics and Engineering, Volumes 201-204, 1 January 2012, Pages 245-262, ISSN 0045-7825, 10.1016/j.cma.2011.09.015 (Accepted 29 September 2011).

Dovstam, K., Göransson, P. and Gartmeier, O. (2012) On linear modeling of interface damping in vibrating structures. Journal of Sound and Vibration, 331, 4299–4312. DOI: 10.1016/j.jsv.2012.03.036

Feng, L. (2012) Tone-like signal in the wind-induced noise of perforated plates. Acta Acustica united with Acustica, 98(1), 188-194.

Feng, L. and Kumar, S. (2012) On application of radiation loss factor in the prediction of sound transmission loss of a honeycomb panel, International Journal of Acoustics and Vibration (Accepted 8 December 2011).

Hynninen, A., Turunen, R., Åbom, M. and Bodén, H.(2012) Acoustic source data for medium speed IC-engines. ASME Journal of vibration and Acoustics, 134(5).

Kierkegaard, A., Allam, S., Efraimsson, G. and Åbom, M. (2012) Simulations of whistling and the whistling potentiality of an in-duct orifice with linear aeroacoustics. Journal of Sound and Vibration. 331, 1084-1096, doi:10.1016/j.jsv.2011.10.028 (Accepted 20 October 2011).

Kierkegaard, A., Boij, S. and Efraimsson, G. (2012) Simulations of the Scattering of Sound Waves at a Sudden Area Expansions. Journal of Sound and Vibration, 331(5), 1068-1083 (Accepted 12 September 2011).

Lejon, J. and Kari, L. (2012) Investigation in the audible frequency range of magneto-sensitive rubber. KGK-Kautschuk Gummi Kunststoffe, 65, 31-35.

Liu, H. and Finnveden, S. (2012) Waveguide Finite Element Method. In Desmet, W, Pluymers, B. and Atak, O. (Eds.) Mid-Frequency - CAE Methodologies for Mid-Frequency Analysis in Vibration and Acoustics, 263- 308.

Lopez Arteaga, I. and Vinken, E. (2012) Example of good practice in of a learning environment with a classroom response system in a mechanical engineering bachelor course. European Journal of Engineering Education (Accepted).

Lopez Arteaga, I., Scholte, R. and Nijmeijer, H. (2012) Improved source reconstruction in Fourier-based Near-field Acoustic Holography applied to small apertures. Mechanical Systems and Signal Processing, 32, 359-373.

Rumpler, R., Deü, J.-F. and Göransson, P. (2012) A modal-based reduction method for sound absorbing porous materials in poro-acoustic finite element models. Journal of the Acoustical Society of America, 132(5), pp. 3162-3179. DOI 10.1121/1.4750496

Shoaib, M., Kari, L. and Azhdar, B. (2012) Simulation of high-velocity compaction process with relaxation assists using the discrete element method. Powder Technology, 217, 394-400.

Åbom, M. and Allam, S. (2012) On the use of micro-perforates for machinery and vehicle noise control. Journal of the Acoustical Society of America, 132(3), 1887.

Östberg, M., Göransson, P., Hörlin, N.-E. and Kari, L. (2012) Weak forms for modelling of rotationally symmetric, multilayered structures, including anisotropic poro-elastic media. International Journal for Numerical Methods in Engineering, 90(8), 1035-1052.

2011

Allam, S. and Åbom, M. (2011) A New Type of Muffler Based on Microperforated Tubes. ASME-Journal of Vibration and Acoustics, vol. 133, June 2011, DOI:10.1115/1.4002956.

Blom, P. and Kari, L. (2011) A non-linear constitutive audio frequency magneto-sensitive rubber model including amplitude, frequency and magnetic field dependence. Journal of Sound and Vibration, 330(5), 947-954.

Bodén, H. (2011) Experimental source characterisation techniques for studying the acoustic properties of perforates under high level acoustic excitation. Journal of the Acoustical Society of America, 130(5), 2639-2647.

Bolin, K., Bluhm, G., Eriksson, G. and Nilsson M. E. (2011) Infrasound and low frequency noise from wind turbines: exposure and health effects, Environ. Res. Lett., 6, doi:10.1088/1748-9326/6/3/035103.

Elnady, T., Elsaadany, S. and Åbom, M. (2011) Flow and Pressure Drop Calculation Using Two-Ports. ASME-Journal of Vibration and Acoustics, vol. 133, Aug 2011, DOI: 10.1115/1.4003593.

Finnveden, S. (2011) A quantitative criterion validating coupling power proportionality in statistical energy analysis. Journal of Sound and Vibration, 330, 87-109.

Grishenkov, D., Kari, L., Brodin, L.Å., Brismar, T. B. and Paradossi, G. (2011) Contrast-enhanced ultrasound measurements of capillary microcirculation: comparison between polymer- and phospholipid-shelled microbubbles. Ultrasonics, 51(1), 40-48.

Holmberg, A., Åbom, M. and Bodén, H. (2011) Accurate experimental two-port analysis of flow generated sound, Journal of Sound and Vibration, 330(26), 6336-6354, doi:10.1016/j.jsv.2011.07.041.

Karlsson, M. and Åbom, M. (2011) On the Use of Linear Acoustic Multiports to Predict Whistling in Confined Flows. Acta Acustica vol. 97.

Karlsson, M. and Åbom, M. (2011) Quasi-steady model of the acoustic scattering properties of a T-junction, Journal of Sound and Vibration, 330(21), 5131-5137, doi:10.1016/j.jsv.2011.05.012.

Knutsson, M., Lennblad, J., Bodén, H. and Åbom, M. (2011) A Study on Acoustical Time-Domain Two-Ports Based on Digital Filters with Application to Automotive Air Intake Systems. SAE Int. J. of Passeng. Cars – Mech. Syst. August 2011 4:970-982; doi:10.4271/2011-01-1522.

Kumar, S., Feng, L., Orrenius, U. (2011) Predicting the Sound Transmission Loss of Honeycomb Panels using the Wave Propagation Approach. Acta Acustica united with Acustica, 97(5), 869-876.

Lopez Arteaga, I. (2011) Green's functions for a loaded rolling tyre. International Journal of Solids and Structures, 48, 3462-3470.

Östberg, M. and Kari, L. (2011) Transverse, tilting and cross-coupling stiffness of cylindrical rubber isolators in the audible frequency range - the wave-guide solution. Journal of Sound and Vibration, 330(13), 3222-3244.

Shoaib, M. and Kari, L. (2011) Discrete element simulation of elasto-plastic shock wave propagation in spherical particles. Advances in Acoustics and Vibration, Vol. 2011, 1-9, DOI:10.1155/2011/123695.

Tiikoja, H., Rämmal, H., Åbom, M. and Boden, H. (2011) Investigations of Automotive Turbocharger Acoustics. SAE Int. J. Engines August 2011 4:2531-2542; doi:10.4271/2011-24-0221.

2010

Bolin, K. and Åbom, M. (2010) Air-borne sound generated by sea waves, J. Acoust. Soc. Am., 127(5), 2771-2779.

Bolin, K., Nilsson, M. E., Khan, S. (2010) The Potential of Natural Sounds to Mask Wind Turbine Noise, Acta Acustica united with Acustica, 96(1), 131-137.

Cameron, C., Wennhage, P., Göransson, P. and Rahmqvist, S. (2010) Structural-acoustic design of a multi-functional sandwich panel in an automotive context. Accepted for publication in Journal of Sandwich Structures and Materials, 12, pp684-708. doi:10.1177/1099636209359845

Cameron, C., Wennhage, P. and Göransson, P. (2010) Prediction of NVH behaviour of trimmed body components in the frequency range 100-500 Hz. Journal of Applied Acoustics, 71, pp 708–721. doi: 10.1016/j.apacoust.2010.03.002

Elnady, T., Allam, S. and Åbom, M. (2010) Modelling perforates in mufflers using two-ports, ASME Journal of Vibration and Acoustics, Dec. 2010, 132, DOI: 10.1115/1.4001510.  

Göransson, P. and Hörlin, N.-E. (2010) Vibro-acoustic modelling of anisotropic porous elastic materials: A preliminary study of the influence of anisotropy on the predicted performance in a multi-layer arrangement. Acta Acustica united with Acustica 96 (2), pp. 258-265.

Hörlin, N.-E. and Göransson, P. (2010) Weak, anisotropic symmetric formulations of Biot’s equations for vibro-acoustic modelling of porous elastic materials. Accepted for publication in Int. J. Numer. Meth. Engng, 84,1519–1540 DOI: 10.1002/nme.2955.

Hörlin, N.-E. (2010) A symmetric weak form of Biot’s equations based on redundant variables representing the fluid, using a Helmholtz decomposition of the fluid displacement vector field. Accepted for publication in Int. J. Numer. Meth. Engng (April 2010) DOI: 10.1002/nme.2956.

Karlssson, M. and Åbom, M. (2010) Aeroacoustics of T-junctions – An experimental investigation. Journal of Sound and Vibration, 329, 1793-1808.

Kierkegaard, A., Boij, S. and Efraimsson, G. (2010) A frequency domain linearized Navier-Stokes equations approach to acoustic propagation in flow ducts with sharp edges. Journal of the Acoustical Society of America, 127(2), 710-719.

Knutsson, M. and Åbom, M. (2010), The effect of turbulence damping on acoustic wave propagation in tubes. Journal of Sound and Vibration, 329, 4719-4739.

Lind-Nordgren, E. and Göransson, P. (2010) Optimising open porous foam for acoustical and vibrational performance. Journal of Sound and Vibration 329(7), 753-767. doi:10.1016/j.jsv.2009.10.009

Nilsson, M. E., Alvarsson, J., Rådsten-Ekman, M. and Bolin, K. (2010) Auditory Masking of Wanted and Unwanted Sounds in a City Park. Noise Control Engineering Journal, 58, 524-531.

Östberg, M., Hörlin, N.-E. and Göransson, P. (2010) Weak formulation of Biot’s equations in cylindrical coordinates with harmonic expansion in the circumferential direction. Int. J. Numer. Meth. Engng. 81 (11) pp. 1439-1454. DOI: 10.1002/nme.2739

2009

Boij, S. (2009) Flow effects on the acoustic end correction of a sudden in-duct area expansion. Journal of the Acoustical Society of America, 126 (3), 995-1004.

Bolin, K. (2009) Prediction method for wind-induced vegetation noise. Acta Acustica united with Acustica, 75, 607-619.

Bolin, K., Boué, M. and Karasalo, I. (2009) Long range sound propagation over a sea surface. Journal of Acoustical Society of America, 126, 2191-2197.

Cameron, C., Lind, E., Wennhage, P. and Göransson, P. (2009) Proposal of a Methodology for Multidisciplinary Design of Multifunctional Vehicle Structures including an Acoustic Sensitivity Study. Int. J. Vehicle Structures & Systems, 1(1-3), 1-13.

Elnady, T., Bodén, H. and Hadidi, B. (2009) Validation of an Inverse Semi-Analytical Technique to Educe Liner Impedance. AIAA JOURNAL Vol. 47, No. 12, December 2009.

Gil-Negrete, N., Vinolas, J. and Kari, L. (2009) A nonlinear rubber material m-del combining fractional order viscoelasticity and amplitude dependent effects. Journal of Applied Mechanics, 76.

Göransson, P., Guastavino, R. and Hörlin, N.-E. (2009) Measurement and inverse estimation of 3D anisotropic flow resistivity for porous materials. J Sound and Vibration 327, 354–367.

Knutsson, M. and Åbom, M. (2009) Sound propagation in narrow tubes including effects of viscothermal and turbulent damping with the application to charge air coolers. Journal of Sound and Vibration, 320, 289-321.

Lejon, J. and Kari, L. (2009) Preload, frequency, vibrational amplitude and magnetic field strength dependence of magnetosensitive rubber. Plastics, Rubber and Composites: Macromolecular Engineering, 38, 321-326.

Peplow, A.T. and Finnveden, S. (2009) Uniform radiation conditions for a sound propagation model. Journal of Computational Acoustics, vol.17(2), 135-157.

2008

Azhdar, B., Stenberg, B. and Kari, L. (2008). Polymer-nanofiller prepared by high-energy ball milling and high velocity cold compaction. Polymer Composites, 29, 252-261.

Enflo, B., Hedberg, C. and Kari, L. (Editors) (2008). Non-Linear Acoustics: Fundamentals and Applications. Publisher: American Institute of Physics, USA.

Blom, P. and Kari, L. (2008). Smart audio frequency energy flow control by magneto-sensitive rubber isolators. Smart Materials and Structures, 17.

Finnveden, S. and Fraggstedt, M. (2008). Waveguide Finite Elements for Curved Structures. Journal of Sound and Vibration, 312, 644-671.

Göransson, P. (2008). Tailored acoustic and vibrational damping in porous solids - Engineering performance in aerospace applications. Aerospace Science and Technology, 12, 26-41.

Karlsson, M., Glav, R. and Åbom, M. (2008). The Herschel-Quincke tube: The attenuation conditions and their sensitivity to mean flow. J. Acoust. Soc. Am., 124(2), 723-732.

Nilsson, C.-M. and Finnveden, S. (2008). Waves in thin walled fluid-filled ducts with arbitrary cross sections. Journal of Sound and Vibration, 310, 58-76.

Peplow, A. T. and Finnveden, S. (2008). Calculation of vibration transmission over bedrock using a Waveguide Finite Element Model. International Journal for Numerical and Analytical Methods in Geomechanics 32, 701-719.

Pecorari, C. (2008). Spring boundary model for a partially closed crack. International Journal of Engineering Science, 46, 182-188.

Poznic, M. and Pecorari, C. (2008). Discriminating surface-breaking from subsurface cracks in pressurized water pipes by means of a parametric modulation technique. NDT & E International, 41, 208-216.

Rustighi, E., Elliott, S.J., Finnveden, S., Gulyás, K., Mócsai, T. and Danti, M. (2008) Linear stochastic evaluation of tyre vibration due to tyre/road excitation. Journal of Sound and Vibration, 310, 1112-1127.

Svensson, E. (2008) Gaussian beam summation in shallow waveguides.
Wave motion, 45, 445-456.

2007

Coja, M. and Kari, L. (2007) Axial audio-frequency stiffness of a bush mounting—the waveguide solution. Applied Mathematical Modelling, 31, 38-53.

Baumann, H. and Åbom, M. (2007) Valve induced noise. In: Handbook of Noise and Vibration Control, Ed. by M. J. Crocker, John Wiley & Sons.

Bodén, H. and Glav, R. (2007) Exhaust and intake noise and acoustic design of mufflers and silencers. In: Handbook of Noise and Vibration Control, Ed. by M. J. Crocker, John Wiley & Sons.

Bonfiglio, P., Pompoli , F., Peplow A. T. et al. (2007) Aspects of computational vibration transmission for sandwich panels. Journal of Sound and Vibration, 303, 780-797.

Guastavino, R. and Göransson, P. (2007) A 3D displacement measurement methodology for anisotropic porous cellular foam materials. Polymer testing, 26, 711-719.

Karasalo, I. (2007) On evaluation of hypersingular integrals over smooth surfaces. Computational Mechanics, 40, 617-625.

Kari, L. (2007) Dynamic Vibration Absorbers. In: Handbook of Noise and Vibration Control, Ed. by M. J. Crocker, John Wiley & Sons.

Liu, B., Feng, L. and Nilsson, A. (2007) Influence of overpressure on sound transmission through curved panels. Journal of Sound and Vibration, 302, 760-776.

Liu, B., Feng, L. and Nilsson, A. (2007) Sound transmission through curved airplane panels with stringer and ring frame attachments. Journal of Sound and Vibration, 300, 949-973.

Nilsson, C.-M. and Finnveden, S. (2007) Input power to waveguides calculated by a finite element method. Journal of Sound and Vibration, 305, 641-658.

Pecorari, C. and Grishenkov, D. (2007) Characterization of ultrasound-induced fracture of polymer shelled ultrasonic contrast agents by correlation analysis. J. Acoust. Soc. America, 122, 2425-2430.

Pecorari, C. and Rokhlin, S. I. (2007) Elasto-plastic micromechanical model for determination of dynamic stiffness and real contact area from ultrasonic measurements. Wear, 262, 905-915.

Peplow, A. T. and Kaynia, A. M. (2007) Prediction and validation of traffic vibration reduction due to cement column stabilization. Soil Dynamics And Earthquake Engineering, 27, 793-802.

Rämmal, H. and Bodén, H. (2007) Modified multi-load method for non-linear source characterisation. Journal of Sound and Vibration, 299, 1094-1113.

Rämmal, H. and Åbom, M. (2007) Characterization of air terminal device noise using acoustic 1-port source models. Journal of Sound and Vibration, 300, 727-743.

Tarrago, M.J.G., Kari, L., Vinolas, J. and Gil-Negrete, N. (2007) Frequency and amplitude dependence of the axial and radial stiffness of carbon black filled rubber bushings. Polymer Testing, 26, 629-638.

Tarrago, M.J.G., Kari, L., Vinolas, J. and Gil-Negrete, N. (2007) Torsion stiffness of a rubber bushing: a simple engineering design formula including the amplitude dependence. Journal of Strain Analysis, 42, 13-21.

Tarrago, M.J.G., Vinolas, J. and Kari, L. (2007) Axial stiffness of carbon black filled rubber bushings - Frequency and amplitude dependence. KGK-Kautschuk Gummi Kunststoffe, 60, 43-48.

Watanabe, K., Ueda, S., Biwa, S., Pecorari, C., Heuer, R. (2007) Closed interface crack with singular stiffness spring model. Int. J. Eng. Science, 45, 210-226.

2006

Albertson, F., Bodén, H. and Gilbert, J. (2006). Comparison of different methods to couple non-linear source descriptions in the time domain to linear system descriptions in the frequency domain – Applicaton to a one-cylinder cold valve-less engine. Journal of Sound and Vibration, 291, 963-985.

Allam, S. and Åbom, M. (2006). Investigation of damping and radiation using full plane wave decomposition in ducts. Journal of Sound and Vibration, 292, 519-534.

Allam, S. and Åbom, M. (2006). Modelling and testing of after-treatment devices. ASME Journal of Vibration and Acoustics, 128, 347-356.

Allam, S. and Åbom, M. (2006). Sound propagation in an array of narrow porous channels with application to diesel particulate filters. Journal of Sound and Vibration, 291, 882-901.

Azhdar, B., Stenberg, B. and Kari, L. (2006). Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction. Polymer Testing, 25, 1069-1080.

Azhdar, B., Stenberg, B. and Kari, L. (2006). Determination of springback gradient in the die on compacted polymer powders during high-velocity compaction. Polymer Testing, 25, 114-123.

Bellander, M., Kari, L., Persson, S. and Stenberg, B. (2006). Rubber technology: past, present, future. Annual Transactions of the Nordic Rheology Society, 14, 179-182.

Boij, S. and Nilsson, B. (2006). Scattering and absorption of sound at flow duct expansions. Journal of Sound and Vibration, 289, 577-594.

Gil-Negrete, N., Vinolas, J. and Kari, L. (2006). A simplified methodology to predict the dynamic stiffness of carbon-black filled rubber isolators in a FE code. Journal of Sound and Vibration, 296, 757-776.

Göransson, P. (2006). Acoustic and vibrational damping in porous solids. Phil. Trans. R. Soc. A, 364, 89-108.

Pecorari, C. and Poznic, M. (2006). On the linear and nonlinear acoustic properties of dry and water-confining elasto-plastic interfaces. Proc. Royal Society A, 462, 769-788.

Pecorari, C., Solodov, I. (2006). Non-classical nonlinear acoustic scattering of solid surfaces in partial contact for NDE applications. In: Universality of Nonclassical Nonlinearity: Applications to Non-Destructive Evaluations and Ultrasonics, Ed. by P. P. Delsanto. Springer.

Peplow, A.T. (2006). On the efficiency of screens near roadside cuttings. Journal of Sound and Vibration, 298, 982-1000.

Poznic, M., Pecorari, C. (2006). So … is this a surface-breaking crack? Journal of Mechanics of Materials and Structures, 1, 743-762.

Svensson, E. (2006). Inverting acoustic communication signals for the sound speed profile. J. Acoust. Soc. Am., 120(3), 1347-1355.

Ueda, S., Biwa, S., Watanabe, K., Heuer, R., Pecorari, C. (2006). On the stiffness of spring model for closed cracks. Int. J. Eng. Science, 44, 874-888.

2005

Allam, S. and Åbom, M. (2005). Acoustic modelling and testing of diesel particulate filters. Journal of Sound and Vibration, 288(1-2), 255-273

Austrell, P.E. and Kari, L. (Editors) (2005). Constitutive Models for Rubber IV. Publisher: A.A. Balkema, Lisse, the Netherlands.

Azhdar, B., Stenberg, B. and Kari, L. (2005). Development of a high-velocity compaction process for polymer powders. Polymer Testing, 24, 909-919.

Birgersson, F., Finnveden, S. and Nilsson, C.-M. (2005). A spectral super element for modelling of plate vibration: part 1, general theory. Journal of Sound and Vibration, 287, 297-314.

Birgersson, F. and Finnveden, S. (2005). A spectral super element for modelling of plate vibration: part 2, turbulence excitation. Journal of Sound and Vibration, 287, 315-328.

Blom, P. and Kari, L. (2005). Amplitude and frequency dependence of magneto-sensitive rubber in a wide frequency range. Polymer Testing, 24, 656-662.

Chandler-Wilde, S.N. and Peplow, A.T. (2005). A boundary integral equation formulation for the Helmholtz equation in a locally perturbed half-plane. Zamm-Zeitschrift für Angewandte Mathematik und Mechanik, 85, 79-88.

Coja, M. and Kari, L. (2005). Rubber versus rubber vibration isolators-The audible frequency contes. KGK-Kautschuk Gummi Kunststoffe, 58, 564-569.

Feng, L. (2005). Modified honeycomb panels to improve sound insulation properties. Acustica, 91, 386-388.

Finnveden, S., Birgersson, F., Ross, U. and Kremer, T. (2005). A model of wall pressure correlation for the prediction of turbulence induced vibration. Journal of Fluids and Structures, 20, 1127-1143.

Hörlin, N.-E. (2005). 3D hierarchical hp-FEM applied to elasto-acoustic modelling of layered porous media. Journal of Sound and Vibration, 285(3), 341-363.

Kari, L. and Blom, P. (2005). Macromolecular Engineering, Magneto-sensitive rubber in a noise reduction context-exploring the potential. Plastics, Rubber and Composites 34, 365-371.

Pecorari, C. (2005). A note on the sensitivity of SV wave scattering to surface-breaking cracks. Ultrasonics, 43, 508-511.

Pecorari, C. and Poznic, M. (2005). Nonlinear scattering by a partially closed surface-breaking crack. J. Acoust. Soc. Am., 117, 592-600.

Peplow, A. T. (2005). Numerical predictions of sound propagation from a cutting over a road-side noise barrier. Journal of Computational Acoustics, 13, 145-162

Wallin, H.P., Carlsson, U., Ross, U. and El Gaidi, K. (2005). Learning MATLAB: Evaluation of methods and materials for first year engineering students. Int. J. Engng. Ed., 21, 692-701.

2004

Birgersson, F., Finnveden, S. and Robert, G. (2004). Modelling turbulence induced vibration of pipes with a spectral finite element method. Journal of Sound and Vibration, 278, 749-772.

Finnveden, S. (2004). Evaluation of modal density and group velocity by a finite element method. Journal of Sound and Vibration, 273, 51-75.

Laister , R., Peplow, A. T. and Beardmore, R. E. (2004). Finite time extinction in nonlinear diffusion equations. Applied Mathematics Letters, 17, 561-567.

Pecorari, C. (2004). Adhesion and nonlinear scattering by rough surfaces in contact: Beyond the phenomenology of the Preisach-Mayergoyz framework. J. Acoust. Soc. Am., 116, 1938-1947.

Peplow, A. T. and Finnveden, S. (2004). A super-spectral finite element method for sound transmission in waveguides. J. Acoust. Soc. Am., 116(3), 1389-1400.

Reagaud, P. L., Glav, R. and Åbom, M. (2004). Study of a folded resonator including the effects of higher order modes. Journal of Sound and Vibration, 273(4-5), 777-792.

2003

Birgersson, F., Ferguson, N. S. and Finnveden, S. (2003). Application of the spectral finite element method to turbulent boundary layer induced vibrations of plates. Journal of Sound and Vibration, 259, 873-891.

Boij, S. and Nilsson, B. (2003). Reflection of sound at area expansions in a flow duct. Journal of Sound and Vibration, 260, 477-498.

Kari, L. (2003). Audible-frequency stiffness of a primary suspension isolator on a high speed tilting bogie. Journal of Rail and Rapid Transit, 217, 47-62.

Kari, L. (2003). Axially symmetric modes in finite cylinders—The wave guide solution. Wave Motion, 37, 191-206.

Kari, L. (2003) Erratum to "Axially symmetric modes in finite cylinders—The wave guide solution" [Wave Motion 36 (2002) 169-184]. Wave Motion, 37, 189.

Kari, L. (2003). On the dynamic stiffness of preloaded vibration isolators in the audible frequency range: Modeling and experiments. The Journal of the Acoustical Society of America, 113, 1909-1921.

Pecorari, C. (2003). Nonlinear interaction of plane ultrasonic waves with an interface between rough surfaces in contact. J. Acoust. Soc. Am., 113, 3065-3072.

Sjöberg, M. and Kari, L. (2003). Nonlinear isolator dynamics at finite deformations: An effective hyperelastic, fractional derivative, generalized friction model. Nonlinear Dynamics, 33, 323-336.

Sjöberg, M. and Kari, L. (2003). Testing of nonlinear interaction effects of sinusoidal and noise excitation on rubber isolator stiffness. Polymer Testing, 22, 343-351.

2002

Baltazar, A., Rokhlin, S. I. and Pecorari, C. (2002). On the relationship between ultrasonic and micro-mechanic properties of contacting rough surfaces. Journal of the Mechanics and Physics of Solids, 50(7), 1397-1416.

Cederholm, A. and Karasalo, I. (2002). Inverse modelling of rubber coated steel plates with a genetic algorithm. Acta Acoustica, 88, 694-698.

Hilderbrand, R. (2002). Asymptotic analysis of hard seismic barriers. Soil Dynamics & Earthquake Engineering, 23, 143-158.

Ivansson, S. (2002). Spherical-shell scattering computations by ordinary exponentials. Acta Acoustica, 88, 643-637.

Ivansson, S. (2002). Low-frequency dispersion-function factorization and classification of P-SV modes by wave number limits. Z. Angew. Math. Mech., 82, 89-99.

Ivansson, S. (2002). Solving ODE boundary-value problems: Safe compound-matrix dimension reduction with the Riccati method. International Journal of Differential Equations and Applications, 5(4), 339-352.

Kari, L. (2002). An analytical temperature dependent collocation model for preloaded rubber cylinders. Journal of Strain Analysis, 37, 289-299.

Kari, L. (2002). Axially symmetric modes in finite cylinders - the wave guide solution. Wave Motion, 36(2), 169-184.

Kari, L. (2002). Dynamic stiffness matrix of a long rubber bush mounting. Rubber Chemistry and Technology, 75, 747-770.

Kari, L. (2002). Pitchfork phase “bifurcation” of isolator stiffness. Journal of Sound and Vibration, 251(2), 373-376.

Kari, L. (2002). The non-linear temperature dependent stiffness of precompressed rubber cylinders - An effective shape factor model. Kautschuk Gummi Kunststoffe, 55, 76-81.

Kari, L. (2002). Stiffness scaling laws and vibration isolators. Applied Acoustics, 63(6), 583-594.

Kari, L., Lindgren, K., Feng, L. and Nilsson, A. (2002). Constrained polymer layers to reduce noise: reality or fiction? - An experimental inquiry into their effectiveness. Polymer Testing, 21, 949-958.

Kari, L., Lokander, M. and Stenberg, B. (2002). Structure-borne sound properties of isotropic magneto-rheological rubber. Kautschuk Gummi Kunststoffe, 55, 669-673.

Kari, L., Sjöberg, M. (2002). Non-linear behavior of a rubber isolator system using fractional derivatives. Vehicle System Dynamics, 37, 217-236.

Lefeuve, G., Peplow, A. T. and Le Houedec, D. (2002). Surface vibration due to a sequence of high speed moving harmonic rectangular loads. Soil Dynamics and Earthquake Engineering, 22, 459-473.

Nilsson, E. and Nilsson, A. C. (2002). Prediction and measurement of some dynamic properties of sandwich structures with honeycomb and foam cores. Journal of Sound and Vibration, 251(3), 409-430.

Nordborg, A. (2002). Wheel/rail noise generation due to non-linear effects and parametric excitation. J. of Acoust. Soc. Am., 111(4), 1772-1781.

2001

Albertsson, F. and Gilbert, J. (2001). Harmonic balance method used for calculating the steady state oscillations of a simple one-cylinder cold engine. Journal of Sound and Vibration, 214(4), 541-565.

Feng, L. (2001). An experimental method for vibrational insertion loss of mechanical joints. Acustica, 87(2), 195-205.

Feng, L. (2001). Vibrational insertion loss of traditional and smart joints. Acustica, 87(2), 191-198.

Feng, L., Liu, M. and Nilsson, A. (2001). Experimental study of structureborne sound transmission loss of one dimensional mechanical joints. J. Acoust. Soc. Am., 110(3), 1391-1397.

Gros, X. E. and Pecorari, C. (2001). Ultrasonic and microscopic investigation of impact damage in GFRP composites. Research in Nondestructive Evaluation, 13(1), 23-36.

Hörlin, N-E., Nordström, M. and Göransson, P. (2001). A 3-D Hierarchical FE Formulation of Biot's Equations for Elasto-acoustic modeling of Porous Media, Journal of Sound and Vibration, 245(4), 633-652.

Kari, L. (2001). Dynamic transfer stiffness measurements of vibration isolators in the audible frequency range. Noise Control Engineering, 49, 88-102.

Kari, L. (2001). On the waveguide modelling of dynamic stiffness of cylindrical vibration isolators. Part I: The Model, solution and experimental comparison. Journal of Sound and Vibration, 244(2), 211-233.

Kari, L. (2001). On the waveguide modelling of dynamic stiffness of cylindrical vibration isolators. Part II: The dispersion relation solution, convergence analysis and comparison with simple models. Journal of Sound and Vibration, 244(2), 235-257.

Kari, L., Eriksson, P. and Stenberg, B. (2001). Dynamic Stiffness of Natural Rubber Cylinders in the Audible Frequency Range Using Wave Guides, Kautschuk Gummi Kunststoffe, 54, 106-113.

Pecorari, C. (2001) Scattering of a Rayleigh wave by a surface-breaking crack with faces in partial contact. Wave Motion, 33, 259-270.

2000

Bodén, H. and Albertson, F. (2000). Linearity tests for in-duct acoustic one-port sources. Journal of Sound and Vibration, 237(1), 45-65.

Bodén, H. and Sarin, S. (2000). Aeroacoustic research in Europe: The CEAS-ASC report on 1999 highlights. Journal of Sound and Vibration, 237(3), 477-482.

Glav, R. (2000). The transfer matrix for a dissipative silencer of arbitrary cross-section. Journal of Sound and Vibration, 236(4), 575-594.

Finnveden, S. and Pinnington, R. J. (2000). A velocity method for estimating dynamic strain and stress in pipes. Journal of Sound and Vibration, 229(1), 147-182.

Karasalo, I. and Hovem, J. (2000). Transient bistatic scattering from buried objects. Experimental Acoustic Inversion Methods for Exploration of the Shallow Water Environment, Caiti et.al. ed., Kluwer, 161-176.

Kari, L. (2000). A non-linear analytical model for preloaded rubber cylinders. Modern Practice in Stress and Vibration Analysis, 51-62.

Kari, L. (2000). Blocked dynamic stiffness matrix of a rubber bush mounting. Modern Practice in Stress and Vibration Analysis, 337-348.

Pecorari, C. (2000). Attenuation and dispersion of Rayleigh waves propagating on a cracked surface: an effective field approach. Ultrasonics, 38, 754-760.

Pecorari, C., Kelly, P. A. (2000). The quasi-static approximation for a cracked interface between a layer and a substrate. J. Acoust. Soc. Am., 107, 2454-2461.

Pecorari, C., Lawrence, C.W., Roberts, S.G., Briggs, G.D.A. (2000). Quantitative evaluation of surface damage in brittle materials by acoustic microscopy. Philosophical Magazine A, 80(11), 2695-2708.

Seldis, T., Pecorari, C. (2000). Scattering-induced attenuation of an ultrasonic beam in austenitic steel. J. Acoust. Soc. Am., 108, 574-579.

1999

Finnveden, S. (1999). A symmetric formulation for experimental statistical energy analysis. Journal of Sound and Vibration, 223(1), 161-169.

Finnveden, S. (1999). Comments on "The high-frequency response of a plate carrying a concentrated mass/spring system". Journal of Sound and Vibration, 225(4), 783-800.

Rice, H. and Göransson, P. (1999). A dynamical model of light fibrous materials. Int. J. Mechanical Science, 41(4-5), 561-579.

Top page top